+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 75⚙️ Fixed Speed Direct Drive
75 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Power: 75 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 75

75 HP 13 Bar SJ Fixed Speed Screw Air Compressor

Explore the 75 HP 13 Bar Fixed Speed Screw Air Compressor, delivering 265 CFM at 13 bar. Designed for industrial high-pressure compressed air applications.

Motor Power75 HP55 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery265 CFM7.51 m³/min
Factory Price (Ex-Works)₹9,20,000
GST & Export Documentation Ready
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 75

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power75 HP / 55 kW
Working Pressure (Discharge)13 Bar / 190 PSI(g) / 1.3 MPa(g)
Free Air Delivery (FAD Capacity)265 CFM / 7.51 m³/min
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level70 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)1600 x 1050 x 1500 mm
Approx. Net Weight1800 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
TechnologyOil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

75 HP 13 Bar SJ Fixed Speed Screw Air Compressor

The SJ RF75 is a 75 HP industrial fixed-speed rotary screw air compressor engineered for applications requiring a combination of elevated operating pressure and substantial compressed air capacity. With a 55 kW motor rating and a maximum operating pressure of 13 bar, it delivers 265 CFM (7.51 m³/min) of compressed air at the specified pressure.

Designed for demanding industrial environments, this compressor is suitable for high-pressure pneumatic systems where equipment requires more than conventional 7–10 bar compressed air. Its 75 HP capacity makes it relevant for larger abrasive blasting installations, pneumatic drilling operations, heavy-duty construction equipment and specialized manufacturing processes.

The SJ RF75 is part of the Sarv Jagat SJ R Series of fixed-speed, single-stage rotary screw compressors. It is intended for industrial users who need a centralized compressed air source for machinery with defined pressure and airflow requirements.

Rather than selecting a compressor based on motor horsepower alone, the correct selection must consider the actual air consumption of connected equipment, required working pressure, simultaneous operating demand, pressure losses across the distribution network and the required air quality.


WHY CHOOSE THIS CAPACITY?

A 75 HP compressor occupies an important capacity range for industrial facilities that require more compressed air than smaller standalone machines can provide, particularly when operating at elevated pressure.

At 13 bar, the SJ RF75 delivers:

• Motor Power: 75 HP / 55 kW
• Operating Pressure: 13 bar(g)
• Pressure Equivalent: 190 PSI(g)
• Air Delivery: 265 CFM
• Metric Air Delivery: 7.51 m³/min
• Compressor Technology: Fixed Speed Rotary Screw
• Compression Configuration: Single Stage

This capacity can be considered for applications such as:

• Large abrasive blasting and surface preparation installations.
• Industrial pneumatic drilling and rock drilling equipment, subject to equipment airflow requirements.
• Heavy-duty pneumatic breakers and construction tools.
• High-pressure air supply for specialized machinery and production equipment.
• Industrial cleaning and air-blowing systems designed for elevated pressure.
• Centralized compressed air installations serving multiple high-pressure pneumatic stations.

The main selection consideration is the available airflow at the required pressure. A 75 HP rating does not mean the compressor delivers the same airflow at every pressure.

For the SJ RF75, the rated airflow changes with the operating pressure:

• At 8 bar: 371 CFM / 10.51 m³/min.
• At 10 bar: 307 CFM / 8.69 m³/min.
• At 13 bar: 265 CFM / 7.51 m³/min.

Therefore, the 13 bar configuration should be selected when the connected equipment genuinely requires elevated pressure. If the application operates at a lower pressure, selecting a lower-pressure configuration may provide greater airflow from the same compressor model.

Before finalizing the selection, evaluate the combined air consumption of all connected machines, peak demand, operating cycle, pressure drop and required reserve capacity.


ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF75 uses single-stage rotary screw compression technology for industrial compressed air generation.

Rotary screw compressors use two intermeshing helical rotors to compress air within the compression element. As the rotors rotate, air enters through the inlet, becomes trapped between the rotor profiles and casing, and is progressively compressed before being discharged toward the downstream air system.

This compression principle provides a continuous compressed air delivery characteristic, making rotary screw technology suitable for industrial processes that require a steady pneumatic supply rather than the reciprocating discharge pattern associated with piston compressors.

The main functional stages of the compression system include:

1. AIR INTAKE
Ambient air enters through the intake filtration arrangement, where airborne dust and particulate contamination are reduced before air reaches the compression element.

2. SCREW ELEMENT
The rotary screw airend compresses the incoming air through the interaction of its rotating helical profiles.

3. LUBRICATION AND INTERNAL COOLING
In an oil-injected configuration, compressor oil performs lubrication, sealing and heat-removal functions within the compression element. The exact internal arrangement is subject to the supplied compressor configuration.

4. AIR-OIL SEPARATION
The compressed air-oil mixture passes through the separation arrangement, where oil is separated from the compressed air before it moves toward the cooling and discharge stages.

5. COOLING AND AIR DISCHARGE
The compressed air passes through the relevant cooling arrangement before being delivered to the downstream compressed air installation.

The resulting compressed air can then be routed through appropriately pressure-rated receivers, moisture separators, filters, dryers and distribution piping according to the application requirements.

For a 13 bar installation, all downstream components must be selected for the applicable maximum working pressure, temperature, flow rate and safety requirements.


FIXED SPEED OPERATING TECHNOLOGY

The SJ RF75 belongs to the SJ R Series fixed-speed rotary screw compressor range.

In a fixed-speed compressor, the motor operates at its designated speed during loaded operation. Compressor capacity is generally regulated through a load/unload control arrangement rather than continuously changing motor speed to match demand.

The operating sequence typically involves:

• LOAD CONDITION: When system pressure falls to the configured loading point, the compressor supplies compressed air to the system.

• UNLOAD CONDITION: When system pressure reaches the configured unloading point, the compressor reduces or stops compression loading according to its control arrangement.

• PRESSURE CONTROL: The controller manages the configured pressure limits and operating sequence, subject to the supplied controller and machine configuration.

Fixed-speed technology is suitable for industrial installations with relatively consistent compressed air demand and operating schedules that justify this type of capacity control.

For facilities with highly variable air consumption, the load/unload cycle, unloaded power consumption, pressure fluctuation and operating hours should be evaluated before choosing fixed-speed or variable-speed technology.

A fixed-speed compressor should not be assumed to deliver proportional energy savings under every load condition. Actual electrical consumption depends on the compressor design, operating pressure, load profile, control settings, installation and maintenance condition.


PREMIUM INDUSTRIAL COMPONENTS & ENGINEERING CONFIGURATION

The performance and service life of a 75 HP industrial screw compressor depend on the complete machine configuration, including the compression element, motor, filtration, lubrication, cooling and electrical control systems.

The SJ RF75 is designed around the functional requirements of an industrial rotary screw compressor system.

Key component groups include:

• ROTARY SCREW AIR END
The compression element is responsible for generating compressed air through the rotary screw mechanism. Airend selection and operating compatibility are important for maintaining the specified pressure and airflow.

• INDUSTRIAL ELECTRIC MOTOR
The motor provides the mechanical power required to drive the compression system. The specified motor rating for the SJ RF75 is 75 HP / 55 kW.

• AIR INTAKE FILTER
The intake filtration arrangement helps prevent dust and airborne particulate matter from entering the compression element.

• OIL FILTRATION SYSTEM
The oil filter helps remove contaminants from the circulating compressor oil, supporting lubrication-system cleanliness.

• AIR-OIL SEPARATOR ELEMENT
The separation system reduces oil carryover from the compressed air stream before discharge.

• OIL COOLER AND COOLING ARRANGEMENT
The cooling system removes heat generated during compression and supports operation within the designed temperature range.

• AFTERCOOLER
Where included in the supplied configuration, the aftercooler reduces compressed air temperature downstream of compression, helping moisture condense for subsequent separation.

• ELECTRICAL CONTROL PANEL
The control arrangement manages compressor operating functions and protection according to the installed electrical and controller configuration.

• INDUSTRIAL ENCLOSURE
The enclosure arrangement houses and protects the compressor assembly. Its ventilation and access design must support cooling airflow and routine maintenance.

Component specifications, motor efficiency class, airend make, controller model, enclosure configuration and optional equipment should be confirmed in the approved technical quotation.

For high-pressure industrial operation, the complete installation must be designed around the compressor's rated delivery of 265 CFM at 13 bar, not merely its 75 HP motor rating.

HEAVY DUTY COOLING SYSTEM

The SJ RF75 operates in a high-pressure industrial environment where heat management is an important part of compressor performance and operational reliability.

During air compression, temperature increases due to the energy involved in the compression process. The cooling arrangement is therefore responsible for maintaining the compressor within its designed operating temperature range.

The cooling system incorporates functional elements such as:

• OIL COOLER: Removes heat from the circulating compressor oil.
• COOLING FAN: Supports heat rejection through the cooler assembly.
• COOLING AIRFLOW: Directs ambient cooling air through the designated heat-exchange surfaces.
• AFTERCOOLER: Where included in the supplied configuration, reduces compressed air temperature before downstream moisture separation.

For industrial installations, adequate ventilation around the compressor is essential. The machine should be installed with sufficient clearance for cooling air circulation, maintenance access and hot-air discharge.

Avoid installing the compressor in an enclosed space without properly engineered ventilation. Excessive ambient temperature, restricted airflow and dirty cooler surfaces can increase operating temperature and affect compressor reliability.

The cooling arrangement should be inspected and maintained according to the manufacturer's service instructions and actual operating conditions.


INTELLIGENT ELECTRICAL & SAFETY FEATURES

The electrical and control arrangement of the SJ RF75 is intended to manage compressor operation and provide protection according to the installed configuration.

Functional control and protection provisions may include:

• MOTOR STARTING AND STOPPING: Controls the operating sequence of the compressor.
• LOAD/UNLOAD CONTROL: Regulates compressor loading according to the configured system pressure.
• PRESSURE MONITORING: Supports monitoring of operating pressure and configured pressure limits.
• TEMPERATURE PROTECTION: Helps protect the compressor against abnormal operating temperatures.
• MOTOR PROTECTION: Electrical protection is selected according to the motor and electrical panel design.
• EMERGENCY STOP: Provides an emergency shutdown function where fitted in the supplied configuration.
• FAULT INDICATION: Controller indications help maintenance personnel identify abnormal operating conditions.

Electrical protection settings, controller functions, alarms, sensor arrangements and emergency-stop configuration should be confirmed against the actual machine supplied.

For a 75 HP / 55 kW compressor, the electrical installation must be designed for the motor's rated load, starting characteristics, supply voltage, short-circuit protection, cable sizing, earthing and applicable electrical standards.

The compressor should be installed and commissioned by qualified personnel.


STANDARD FEATURES

The SJ RF75 is an industrial fixed-speed rotary screw compressor configured around the following core functional systems:

• 75 HP / 55 kW industrial motor rating.
• Single-stage rotary screw compression technology.
• Fixed-speed compressor operating arrangement.
• Air intake filtration system.
• Compressor lubrication and oil filtration arrangement, subject to the supplied compressor design.
• Air-oil separation system for oil-injected configurations.
• Cooling arrangement for compressor heat management.
• Industrial electrical control and protection arrangement.
• Pressure monitoring and load/unload operating control, subject to controller configuration.
• Service access for routine inspection and maintenance.

Final standard equipment and component specifications should be confirmed in the approved quotation and technical datasheet.


OPTIONAL FEATURES & COMPRESSED AIR SYSTEM ACCESSORIES

The compressor is one part of a complete compressed air installation. For a 13 bar system, downstream equipment must be selected to match the required airflow, pressure rating, air quality and operating conditions.

The following equipment can be considered according to the application:

1. AIR RECEIVER TANK

A pressure-rated air receiver stores compressed air and helps manage short-duration demand fluctuations. Receiver capacity should be selected based on compressor output, demand variation, allowable pressure fluctuation and the system's operating requirements.

2. REFRIGERATED AIR DRYER

A refrigerated air dryer reduces moisture content in compressed air by cooling it and removing condensed water. Its rated working pressure and actual flow capacity must be suitable for the 13 bar system.

3. DESICCANT AIR DRYER

A desiccant dryer can be considered where a lower pressure dew point is required than a refrigerated dryer can provide. Selection depends on the required dew point, inlet conditions, purge-air consumption and operating cost.

4. MOISTURE SEPARATOR

A moisture separator removes bulk liquid condensate from compressed air after cooling. It is commonly installed upstream of the air dryer.

5. PRE-FILTER AND AFTER-FILTER

Compressed air filters help remove particulate matter, liquid aerosols and other contaminants according to the selected filtration grade.

6. MICRO-FILTER

A micro-filter can be used where finer oil-aerosol and particulate removal is required. Its performance depends on the filter element specification and operating conditions.

7. ACTIVATED CARBON FILTER

An activated carbon filter can be considered where oil vapour and odour reduction are required. It is not a substitute for the correct upstream filtration and drying arrangement.

8. AUTOMATIC DRAIN VALVE

Automatic condensate drains remove collected water from receivers, separators, filters and dryers. Correct drain selection helps prevent condensate accumulation and manual drainage dependency.

9. OIL-WATER SEPARATOR

An oil-water separator can be installed to treat oil-contaminated condensate before disposal, subject to applicable environmental and wastewater regulations.

10. PRESSURE-REGULATING VALVE

Where downstream equipment requires a pressure below 13 bar, an appropriately rated pressure regulator can reduce the delivery pressure. Regulation does not increase available airflow.

11. INDUSTRIAL COMPRESSED AIR PIPING

A properly sized distribution network reduces pressure drop and supports reliable airflow across connected machinery. Aluminium compressed air piping or another suitably engineered piping system can be selected according to installation requirements.

12. AIR QUALITY MONITORING

Depending on process requirements, additional monitoring equipment such as dew point monitors, differential pressure indicators and airflow meters can be incorporated into the compressed air system.

IMPORTANT 13 BAR INSTALLATION REQUIREMENT:

The receiver tank, dryer, filters, separators, valves, piping, hoses, fittings and safety devices must all have suitable pressure ratings for the maximum pressure and applicable operating conditions.

Equipment rated only for conventional 7–10 bar systems must not automatically be used in a 13 bar installation.


TECHNICAL SPECIFICATIONS

Product: SJ RF75 Fixed Speed Screw Air Compressor

Model: SJ RF75
Motor Power: 75 HP
Motor Rating: 55 kW
Maximum Operating Pressure: 13 bar(g)
Pressure Equivalent: 190 PSI(g)
Pressure Equivalent: 1.3 MPa(g)
Air Delivery at 13 Bar: 265 CFM
Air Delivery at 13 Bar: 7.51 m³/min
Compressor Technology: Rotary Screw
Compression Configuration: Single Stage
Operating Technology: Fixed Speed

PRESSURE-WISE AIR DELIVERY:

At 8 bar:
371 CFM / 10.51 m³/min

At 10 bar:
307 CFM / 8.69 m³/min

At 13 bar:
265 CFM / 7.51 m³/min

The airflow figures correspond to different operating pressure configurations. The 13 bar capacity is 265 CFM, and this is the figure to use when evaluating the SJ RF75 for a 13 bar application.

Final motor, electrical, dimensional, connection, noise and component details should be confirmed from the approved technical datasheet for the supplied configuration.


INDUSTRIAL APPLICATIONS

The SJ RF75 75 HP 13 Bar Screw Air Compressor can be considered for industrial installations where equipment requires elevated compressed air pressure and the total demand falls within its rated delivery of 265 CFM (7.51 m³/min) at 13 bar.

Its application suitability must be established using the machinery manufacturer's specified working pressure and air consumption.

1. ABRASIVE BLASTING & SURFACE PREPARATION

Potential applications include:

• Industrial sandblasting machines.
• Abrasive blasting cabinets and blast rooms.
• Pressure blast pot systems.
• Pneumatic abrasive media conveying equipment.
• Industrial steel surface preparation.
• Shot-blasting equipment with pneumatic control requirements.

The compressor can be evaluated for larger blasting installations where the combined nozzle consumption and operating pressure are within the available airflow. Multiple blasting nozzles can substantially increase air demand, so nozzle diameter, blasting pressure and simultaneous operation must be calculated before selection.

2. MINING & ROCK DRILLING

Potential applications include:

• Pneumatic rock drilling equipment.
• Industrial pneumatic drilling machines.
• Quarry drilling support equipment.
• Pneumatic scaling tools.
• Mining maintenance and pneumatic service stations.

Important: Down-the-hole drilling rigs and other large drilling systems can require substantially higher airflow or different pressure specifications. The SJ RF75 must not be assumed suitable without checking the drilling equipment manufacturer's actual CFM requirement, operating pressure and duty cycle.

3. CONSTRUCTION & HEAVY-DUTY PNEUMATIC EQUIPMENT

Potential applications include:

• Heavy-duty pneumatic breakers.
• Industrial jackhammers.
• Pneumatic demolition equipment.
• Large pneumatic impact tools.
• Construction-site compressed air distribution systems.
• Specialized pneumatic equipment requiring elevated pressure.

The simultaneous air consumption of the connected tools and pressure loss through long hoses and distribution lines must be considered.

4. HEAVY ENGINEERING & METAL FABRICATION

Potential applications include:

• Pneumatic metal cleaning systems.
• Industrial air-blowing stations.
• Abrasive cleaning installations.
• Pneumatic fixture and clamping equipment with higher pressure requirements.
• Specialized fabrication machinery.
• Industrial surface preparation equipment.

Conventional CNC and VMC machines generally use lower compressed air pressures. A 13 bar compressor should only be selected for these applications when a specific connected process or machine requires elevated pressure.

5. INDUSTRIAL PNEUMATIC CONVEYING & MATERIAL HANDLING

Potential applications include:

• Pressure-based pneumatic conveying equipment.
• Specialized pneumatic material transfer systems.
• Industrial powder handling equipment.
• Pneumatic bulk material handling installations.
• High-pressure air supply for dedicated conveying machinery.

Conveying systems vary significantly in pressure and airflow demand. Dense-phase and dilute-phase systems have different operating requirements, so compressor selection must follow the conveying system's engineering specification.

6. SPECIAL-PURPOSE INDUSTRIAL MACHINERY

The SJ RF75 can also be evaluated for:

• High-pressure pneumatic actuators.
• Specialized industrial air-operated machinery.
• Dedicated pneumatic production equipment.
• Industrial air-blowing and cleaning systems.
• Machinery requiring a regulated 13 bar compressed air supply.

The suitability of each application depends on the machine's actual pressure requirement, instantaneous airflow consumption and operating cycle.

APPLICATION SELECTION NOTE:

A 13 bar compressor is not automatically more suitable for every industrial plant. Many standard pneumatic machines operate at lower pressures. Operating at unnecessarily high pressure increases compression energy consumption and may require additional pressure regulation.

For correct selection, calculate:

Total Air Demand = Sum of Connected Equipment Air Consumption

Then account for simultaneous operation, leakage, pressure drop and an appropriate design reserve. The final demand must remain within the compressor's available airflow at the required operating pressure.


FREQUENTLY ASKED QUESTIONS

Q1. What is the air delivery of the SJ RF75 75 HP compressor at 13 bar?

The SJ RF75 delivers 265 CFM (7.51 m³/min) at 13 bar operating pressure, according to the official specification sheet.

Q2. What is the motor power of the SJ RF75?

The compressor has a rated motor power of 75 HP, equivalent to 55 kW.

Q3. Is the SJ RF75 suitable for sandblasting applications?

It can be considered for industrial abrasive blasting systems requiring up to 13 bar, provided the combined air consumption of the blasting nozzles and associated equipment is within the compressor's rated 265 CFM delivery.

Q4. Can this compressor be used for mining and drilling equipment?

It can be evaluated for pneumatic drilling and mining equipment where the specified pressure and airflow are compatible. Large DTH drilling rigs may require substantially higher airflow, so OEM specifications must be checked.

Q5. What is the difference between the SJ RF75 8 bar and 13 bar versions?

The airflow differs according to the operating pressure:

• 8 bar: 371 CFM / 10.51 m³/min.
• 13 bar: 265 CFM / 7.51 m³/min.

The 13 bar configuration provides higher operating pressure but lower airflow than the 8 bar configuration.

Q6. Is the SJ RF75 a fixed-speed or variable-speed compressor?

The SJ RF75 belongs to the fixed-speed SJ R Series. Its motor operates at its designated speed during loaded operation, with compressor capacity generally managed through load/unload control.

Q7. Can I connect an air dryer and receiver tank to this compressor?

Yes. A suitably sized and pressure-rated receiver tank and air dryer can be incorporated into the compressed air system. Both should be selected according to the compressor's operating pressure, airflow, inlet temperature and required air quality.

Q8. Can the compressor supply multiple industrial machines simultaneously?

Yes, subject to the combined air demand remaining within the available 265 CFM at 13 bar. The connected machinery's pressure requirements, operating cycles and distribution-system pressure losses must be considered.

Q9. Can the 13 bar compressor supply machines that require 7 or 8 bar?

Yes. A properly selected pressure regulator can reduce the downstream pressure to the machine's required level. However, the compressor's higher operating pressure should be justified by the overall system requirement because unnecessary pressure increases energy consumption.

Q10. What information is required to select the correct 75 HP compressor?

The main selection inputs are:

• Required operating pressure.
• Total air consumption in CFM or m³/min.
• Number of machines operating simultaneously.
• Equipment duty cycle.
• Required compressed air quality.
• Distribution piping length and pressure drop.
• Receiver tank and dryer requirements.

Q11. Is the SJ RF75 suitable for continuous industrial operation?

Rotary screw compressors are commonly selected for industrial compressed air systems with sustained demand. Actual permissible duty, ambient conditions, maintenance intervals and operating limits must follow the supplied machine's technical documentation.

Q12. Where can I get a quotation for the SJ RF75?

Contact Sarv Jagat Corporation for technical selection and commercial quotation. Share your required operating pressure, total airflow consumption, application and compressed air treatment requirements to help determine the appropriate configuration.


WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial compressed air solutions covering screw compressors, reciprocating compressors, air dryers, air receiver tanks, filtration systems, spare parts and compressor servicing.

The SJ RF75 is part of the SJ R Series, developed for industrial users requiring a fixed-speed rotary screw compressor with a 75 HP motor rating and a 13 bar pressure configuration.

Our compressed air solutions can be evaluated around the actual requirements of your production equipment, including:

• Compressor capacity and operating pressure selection.
• Industrial screw compressor configurations.
• Air receiver tank selection.
• Refrigerated and desiccant air dryer systems.
• Compressed air filtration and moisture separation.
• Compressed air distribution system requirements.
• Spare parts and compressor maintenance support.

Whether your requirement involves abrasive blasting, pneumatic drilling, heavy engineering or specialized industrial machinery, proper compressor selection begins with accurate airflow and pressure calculations.

For the SJ RF75, the key rated specification is 265 CFM at 13 bar.

Contact Sarv Jagat Corporation for the SJ RF75 75 HP 13 Bar Fixed Speed Screw Air Compressor.

Sarv Jagat Corporation
Ahmedabad, Gujarat, India.
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote