SJ RV 40⚡ Permanent Magnet VFD

Power: 40 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Variable Speed SJ Screw Air Compressor VFD/VSD•Model Code: SJ RV 40
40 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor
40 HP SJ RV40 VFD screw air compressor delivers 124 CFM at 13 bar. Variable-speed rotary screw technology for high-pressure industrial pneumatic applications.
Motor Power40 HP30 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery124 CFM3.51 m³/min
Factory Price (Ex-Works)₹5,70,000
GST & Export Documentation ReadyCore Engineering Highlights:
Permanent Magnet Synchronous Motor (IE4 super-premium efficiency rating)
Advanced vector inverter frequency control saving up to 35% on electrical costs
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with pressure & temperature protection
Soft-start zero inrush current design extending motor and mechanical life
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet
ENGINEERING SPECIFICATIONS — SJ RV 40
| Specification Parameter | Certified Engineering Rating |
|---|---|
| Motor Power | 40 HP / 30 kW |
| Working Pressure (Discharge) | 13 bar(g) / 190 PSI(g) / 1.3 MPa(g) |
| Free Air Delivery (FAD Capacity) | 124 CFM / 3.51 m³/min |
| Drive Type | Variable Speed VFD (Permanent Magnet) |
| Cooling System | Oversized Vacuum-Brazed Aluminum Heat Exchanger |
| Micro-Controller PLC | MAM-880 Intelligent Micro-Computer with RS-485 Modbus |
| Electrical Grid Compatibility | 415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available) |
| Operating Sound Level | 66 ± 2 dB(A) Acoustic Enclosure |
| Unit Dimensions (L × W × H) | 1600 x 1050 x 1500 mm |
| Approx. Net Weight | 1030 kg |
| Cooling Method | High Efficiency Air Cooled |
| Voltage & Frequency | 415V ±10% / 3-Phase / 50 Hz |
| Stage | Single Stage |
| Type | Variable Speed (VFD) |
| Technology | Oil Injected Rotary Screw |
| Drive | Direct Driven |
Technical Documentation & Plant Application Guide
PRODUCT OVERVIEW & ENGINEERING GUIDE
Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper
40 HP 13 Bar SJ VFD Variable Speed Screw Air Compressor
The SJ RV40 is a 40 HP variable-speed rotary screw air compressor designed for industrial facilities requiring higher compressed-air capacity at elevated operating pressure. With a motor power rating of 30 kW and a specified air delivery of 124 CFM (3.51 m³/min) at 13 bar(g), it can be evaluated for medium-to-heavy industrial pneumatic installations, specialised production machinery and higher-pressure compressed-air utility systems.
The integrated Variable Frequency Drive (VFD) technology adjusts motor speed according to changing compressed-air demand within its designed operating range. This makes the RV40 relevant to manufacturing environments where air consumption varies with machine cycles, production schedules, intermittent pneumatic tools or multiple operating stations.
Its 13 bar configuration is intended for applications where the connected machinery genuinely requires higher pressure. The compressor's suitability depends on actual airflow consumption, pressure at the point of use, simultaneous machine operation, air-quality requirements and operating duty cycle.
## Why Choose a 40 HP VFD Compressor?
The 40 HP capacity provides a higher specified airflow than the smaller RV models, making it suitable for evaluating larger individual pneumatic installations or multiple connected machines with compatible pressure and consumption requirements.
The SJ RV40 delivers 124 CFM at 13 bar. Its VFD control arrangement allows the compressor to adjust motor speed in response to changing air demand rather than relying exclusively on fixed-speed operation.
Potential selection advantages include:
- **Higher airflow capacity:** 124 CFM at 13 bar for industrial systems requiring greater compressed-air delivery than smaller capacity models.
- **Variable-speed operation:** Motor speed can be adjusted according to demand within the designed operating range.
- **Multiple pneumatic workstations:** Can be evaluated for installations where several compatible machines share a compressed-air network.
- **Industrial surface preparation:** Suitable for assessing selected abrasive blasting and pneumatic finishing applications, subject to nozzle consumption and operating pressure.
- **Heavy engineering support:** Can serve suitable pneumatic tools, assembly fixtures and specialised manufacturing equipment.
- **Integrated air-system configuration:** Can be combined with appropriately sized receivers, dryers, filtration equipment, pressure regulation and distribution piping.
A 40 HP rating does not establish the number of machines that can operate simultaneously. The selection must be based on the total connected airflow requirement at the intended pressure, including peak demand and pressure losses through the downstream system.
## Industrial Applications and Machinery
The SJ RV40 should be evaluated for applications requiring higher-pressure compressed air with total demand compatible with its specified delivery of 124 CFM at 13 bar. The following industry and machinery examples are potential applications, subject to actual equipment specifications and operating conditions.
### 1. Abrasive Blasting, Shot Blasting and Surface Preparation
Abrasive blasting is an important application category for higher-pressure compressed-air systems. Air consumption depends on blasting nozzle diameter, nozzle pressure, abrasive type, hose length and the number of simultaneously operating blast stations.
Potential equipment includes:
- Industrial pressure sandblasting machines
- Abrasive blasting pots
- Portable pressure blasting units
- Blast cabinets
- Shot-blasting machine pneumatic systems
- Industrial blast-room equipment
- Metal surface preparation machinery
- Rust and coating removal equipment
- Pneumatic abrasive conveying systems
- Component finishing and cleaning stations
The RV40 can be considered for selected blasting installations where the required pressure and total nozzle airflow remain within its rated output. Larger blasting nozzles or multiple continuous blasting stations may exceed 124 CFM. Actual nozzle consumption must therefore be calculated before selecting the compressor.
### 2. Foundry, Casting and Metal Processing Industry
Foundries and metal-processing facilities use compressed air for pneumatic tools, moulding-line actuation, component cleaning and selected surface preparation operations.
Potential machinery includes:
- Pneumatic foundry cleaning equipment
- Sand mould preparation machinery
- Pneumatic sand handling systems
- Foundry moulding-line actuators
- Casting component cleaning stations
- Pneumatic fettling tools
- Casting finishing equipment
- Shot-blasting machines
- Pneumatic descaling equipment
- Industrial metal component cleaning systems
The RV40 can be evaluated for suitable production sections and maintenance stations. Large continuous pneumatic sand handling and blasting operations require separate airflow calculations because their demand can exceed the compressor's rated delivery.
### 3. Heavy Engineering and Industrial Fabrication
Heavy engineering facilities require compressed air for selected pneumatic tools, fabrication support, assembly operations and surface finishing.
Potential machinery and equipment include:
- Industrial pneumatic riveting machines
- Heavy-duty impact wrench systems
- Pneumatic chipping hammers
- Scaling and descaling equipment
- Pneumatic metal finishing tools
- Fabrication assembly fixtures
- Pneumatic clamping and positioning systems
- Special-purpose fabrication machinery
- Industrial deburring equipment
- Pneumatic cleaning stations
- Heavy equipment component assembly systems
The 40 HP capacity can be evaluated for combinations of pneumatic tools and production equipment where simultaneous airflow demand is within the available output. Pressure regulators may be required for conventional lower-pressure pneumatic machinery.
### 4. Construction, Infrastructure and Mining Equipment
Selected construction, infrastructure and mining equipment uses compressed air for drilling, breaking, chipping, cleaning and specialised maintenance operations.
Potential equipment includes:
- Pneumatic rock drills
- Industrial pneumatic breakers
- Concrete chipping equipment
- Pneumatic scaling tools
- Specialised demolition tools
- Road maintenance pneumatic equipment
- Construction machinery maintenance tools
- Mining equipment servicing stations
- Pneumatic cleaning systems
- Construction equipment assembly fixtures
Large pneumatic rock drills and breakers can consume substantial airflow. The RV40 should only be selected where the equipment manufacturer's pressure and CFM requirements are compatible with its 124 CFM delivery at 13 bar. Continuous operation of multiple high-consumption tools may require a larger compressor installation.
### 5. Heavy Vehicle, Commercial Vehicle and Transport Workshops
Large vehicle maintenance facilities use compressed air for pneumatic servicing tools, fastening equipment, component maintenance and tyre-related operations.
Potential applications include:
- Heavy-duty pneumatic impact wrenches
- Truck and bus wheel-service equipment
- Pneumatic riveting and fastening systems
- Commercial vehicle maintenance tools
- Industrial tyre inflation systems
- Pneumatic cleaning and servicing stations
- Heavy vehicle component assembly fixtures
- Workshop compressed-air distribution systems
- Specialised vehicle maintenance equipment
The RV40 can be evaluated for workshops with multiple intermittent pneumatic tools and compatible air consumption. Tyre inflation systems require correctly rated inflation assemblies, pressure gauges, regulators and hoses.
### 6. Automotive and Auto Component Manufacturing
Automotive manufacturing facilities use compressed air for assembly operations, pneumatic tooling, component handling, surface preparation and specialised production equipment.
Potential machinery includes:
- Automotive component assembly fixtures
- Pneumatic riveting machines
- Industrial fastening systems
- Pneumatic clamping and positioning equipment
- Engine component manufacturing fixtures
- Transmission assembly equipment
- Pneumatic deburring stations
- Automotive component cleaning equipment
- Special-purpose assembly machines
- Selected compressed-air leak-testing equipment
Most conventional automotive production-line actuators and tools operate at lower pressure. The 13 bar configuration is relevant only where a specific machine or process requires it. Compressed-air testing must use equipment designed and rated for the intended test pressure.
### 7. Agricultural Machinery and Equipment Manufacturing
Agricultural machinery manufacturers use pneumatic systems in component assembly, machine production, selected testing stations and specialised material-handling operations.
Potential machinery includes:
- Seed drill manufacturing and assembly equipment
- Precision planter assembly systems
- Agricultural sprayer manufacturing machinery
- Combine harvester component assembly fixtures
- Rotavator and cultivator manufacturing equipment
- Tractor attachment assembly systems
- Pneumatic riveting and fastening stations
- Agricultural equipment cleaning machinery
- Special-purpose agricultural machinery testing fixtures
- Grain and seed-processing equipment with suitable pneumatic requirements
The RV40 may be evaluated for manufacturing installations with multiple compatible pneumatic workstations. Standard pneumatic cylinders and assembly tools may require lower regulated pressure rather than direct 13 bar supply.
### 8. Pharmaceutical and Process Machinery Manufacturing
Pharmaceutical and process equipment manufacturing involves pneumatic actuation, machine assembly, material handling and packaging operations.
Potential machinery includes:
- Rotary tablet compression machines
- Tablet coating equipment
- Capsule filling machines
- Granulation machinery
- Fluid bed processors and dryers
- Powder filling and dosing machines
- Blister packaging machines
- Pharmaceutical bottle filling and capping machines
- Automatic inspection and sorting equipment
- Special-purpose pharmaceutical machinery assembly fixtures
The RV40 can be evaluated for suitable machine utilities and manufacturing operations. Many pharmaceutical machines use lower-pressure pneumatic circuits. Product-contact and critical process air require independently specified filtration, drying, oil-control and validation arrangements.
### 9. Industrial Packaging and Production Automation
Packaging facilities often experience changing compressed-air demand because of intermittent machine actuators, product changeovers and simultaneous operation of different production lines.
Potential equipment includes:
- Vertical form-fill-seal packaging machines
- Horizontal form-fill-seal packaging machines
- Automatic pouch filling and sealing machines
- Industrial bagging and weighing systems
- Bottle filling and capping machines
- Carton erecting and sealing machinery
- Pneumatic product rejection systems
- Automatic sorting and feeding equipment
- Industrial labelling machines
- Special-purpose packaging automation systems
- Pneumatic conveying equipment with suitable pressure requirements
The VFD arrangement can be relevant where combined plant demand changes during production. Most conventional packaging equipment operates at lower pneumatic pressure, so the distribution system should provide appropriate downstream pressure regulation.
### 10. Shipbuilding, Marine Engineering and Heavy Fabrication
Marine engineering and shipbuilding operations use compressed air for selected maintenance tools, surface preparation, fabrication and equipment assembly.
Potential equipment includes:
- Portable abrasive blasting equipment
- Marine component surface preparation systems
- Pneumatic riveting equipment
- Industrial chipping and scaling tools
- Ship component cleaning stations
- Heavy fabrication clamping systems
- Pneumatic maintenance tools
- Special-purpose marine equipment assembly fixtures
Large shipyard blasting operations generally demand significantly higher airflow. The RV40 should be evaluated for selected smaller installations, individual workstations or intermittent operations rather than assumed suitable for an entire shipyard blasting facility.
### 11. Industrial Machinery and Special-Purpose Equipment Manufacturing
Machine-building companies may require compressed air for pneumatic fixtures, specialised tooling, component assembly and equipment testing.
Potential machinery includes:
- Special-purpose pneumatic machines
- Automated assembly equipment
- Industrial pneumatic riveting systems
- Pneumatic clamping and workholding systems
- Pneumatic positioning equipment
- Machine-building test fixtures
- Industrial valve and actuator testing equipment
- Pneumatic material-handling systems
- Specialised machine commissioning equipment
- Custom-built industrial pneumatic systems
The RV40 can be considered where the machinery requires higher-pressure air and its combined consumption remains within the available compressor capacity.
## Advanced Rotary Screw Compression Technology
The SJ RV40 uses single-stage rotary screw compression technology. The compression process is based on two intermeshing screw rotors that progressively reduce the volume of air trapped between the rotor profiles and compressor housing.
During operation, atmospheric air enters through the intake arrangement and moves into the compression element. The rotating screw profiles transport and compress the air before it passes through the downstream separation and cooling arrangements, according to the supplied compressor configuration.
The principal functions of the rotary screw system include:
- Continuous rotary compression rather than reciprocating piston movement.
- Controlled atmospheric air intake through the filtration arrangement.
- Compression through intermeshing rotor profiles.
- Lubrication and heat management in an oil-injected configuration, where supplied.
- Air-oil separation before compressed air enters the downstream system.
- Thermal management through the compressor cooling arrangement.
The actual air-end design, rotor profile, component manufacturer and internal construction should be confirmed against the supplied technical configuration.
For industrial installations, correct ventilation, intake filtration, planned maintenance and suitable downstream air treatment are important considerations for maintaining compressor operating conditions.
## Variable Frequency Drive Technology
The SJ RV40 incorporates Variable Frequency Drive technology to regulate motor speed according to changing compressed-air demand within its designed operating range.
In a conventional fixed-speed compressor, the motor generally operates at a fixed speed during loaded operation, while capacity is regulated through its load/unload arrangement. A VFD compressor varies motor frequency and speed to adjust compressor output as system demand changes.
This can be useful in facilities where compressed-air consumption varies due to:
- Multiple production lines operating at different times.
- Intermittent abrasive blasting and pneumatic tool usage.
- Changing machine cycles.
- Batch-based manufacturing processes.
- Variable pneumatic demand from automated equipment.
- Different production schedules and shift patterns.
- Fluctuating demand from maintenance and utility stations.
### VFD Operating Benefits
**Demand-based output adjustment:** Motor speed can be adjusted to follow changing compressed-air consumption within the permitted operating range.
**Pressure management:** Variable-speed control can help maintain the selected system pressure when the controller and installation are correctly configured.
**Reduced unnecessary unloading:** Under suitable operating conditions, VFD operation can reduce the time spent in conventional load/unload operation.
**Controlled motor acceleration:** The drive can provide controlled motor speed changes and reduce repeated direct-on-line starting, subject to the electrical configuration.
**Variable-load suitability:** Particularly relevant for production environments where air demand changes throughout the operating shift.
### Energy Consumption Considerations
VFD technology does not guarantee a fixed percentage of electricity savings.
Actual energy performance depends on the plant's air-demand profile, pressure settings, leakage, operating hours, compressor operating range, motor efficiency, drive efficiency and system design.
A plant operating continuously near full compressor capacity may have limited energy-saving opportunity compared with a system experiencing substantial periods of reduced demand. An air-demand assessment and power-consumption analysis should therefore be completed before estimating financial savings.
## Industrial Components and Engineering Configuration
The SJ RV40 is intended to operate as part of an industrial compressed-air system. Its principal component arrangements may include the following, depending on the approved supply configuration.
**Rotary Screw Air-End:** The compression element responsible for generating compressed air through rotary screw movement.
**Electric Motor:** Supplies mechanical power to the compressor air-end. Motor efficiency class, protection rating and electrical specifications should be confirmed in the approved configuration.
**Variable Frequency Drive:** Controls motor speed according to required compressor output within its designed operating range.
**Air Intake Filter:** Removes airborne particulate matter before air enters the compression system.
**Oil Filtration System:** In an oil-injected configuration, helps remove contaminants from circulating compressor oil.
**Air-Oil Separation System:** Separates compressor oil from compressed air before the air moves towards the downstream cooling and delivery arrangement.
**Oil Cooling Arrangement:** Helps control the temperature of circulating compressor oil.
**Aftercooling Arrangement:** Reduces compressed-air temperature downstream of compression, where included in the supplied package.
**Electrical Control System:** Supports compressor operation, monitoring and protective functions according to the supplied controller and electrical configuration.
The actual component manufacturer, model, dimensions and performance ratings should be confirmed in the final technical offer.
## Installation and System Selection Considerations
The SJ RV40 is rated at 124 CFM at 13 bar. The complete compressed-air installation should be designed around this pressure-specific delivery rather than the higher airflow figures available at lower pressure.
Before installation, evaluate:
- Required operating pressure at the connected machinery.
- Total compressed-air consumption in CFM or m³/min.
- Simultaneous operation of production equipment.
- Peak airflow during machine cycles.
- Pressure losses through dryers, filters, valves and piping.
- Required compressed-air quality and pressure dew point.
- Air receiver capacity and system pressure variation.
- Electrical supply and installation conditions.
- Ambient temperature and compressor-room ventilation.
- Daily operating hours and future production expansion.
Where connected machinery requires lower pressure, suitable downstream regulators should be installed. A regulator reduces pressure but does not create additional airflow. Pressure losses across treatment equipment and distribution piping must be considered during system design.
For abrasive blasting, pneumatic drilling, heavy-duty tools and other high-consumption applications, actual equipment airflow must be checked before finalising the compressor selection.
Sarv Jagat can configure suitable air-treatment equipment, receiver tanks, filtration stages, pressure controls, monitoring instruments, piping and other accessories according to the customer's process and installation requirements. These options are selected separately based on the required system performance.
## Heavy-Duty Cooling System
The SJ RV40 requires an effective cooling arrangement to manage heat generated during air compression, lubrication and electrical operation.
Depending on the supplied configuration, the cooling system may include an oil cooler, compressed-air aftercooler, cooling fan and ventilation arrangement.
The principal functions include:
- **Oil temperature management:** Helps maintain suitable operating temperature of circulating compressor oil in an oil-injected configuration.
- **Compressed-air aftercooling:** Reduces compressed-air temperature downstream of the compression process, where an aftercooler is included.
- **Cooling airflow:** Supports heat rejection from the compressor package.
- **Enclosure ventilation:** Helps prevent excessive temperature accumulation within the compressor enclosure.
Correct compressor-room ventilation is essential. The installation should provide adequate cooling-air intake, sufficient clearance around the compressor and a suitable hot-air discharge arrangement. Recirculation of hot exhaust air, blocked ventilation paths and excessive ambient temperature can negatively affect operating conditions.
## Intelligent Electrical and Safety Features
The SJ RV40 uses Variable Frequency Drive technology to adjust motor speed according to compressed-air demand within its designed operating range.
Depending on the supplied VFD, controller and electrical configuration, the control arrangement may support:
- Motor overload protection
- High-temperature protection
- Pressure monitoring
- Drive fault indication
- Operating-status indication
- Emergency stop provision
- Operating-hour monitoring
- Phase failure and phase-sequence protection, where provided
- Automatic control functions according to controller configuration
The VFD varies the electrical frequency supplied to the motor to regulate its speed. The actual control range, electrical ratings, monitoring functions and protective features depend on the selected drive, motor and controller.
Electrical installation should follow the compressor's approved electrical drawings and applicable industrial electrical safety requirements.
## Standard Features
The SJ RV40 is based on a single-stage variable-speed rotary screw compressor arrangement. Its principal systems may include the following, depending on the approved supply configuration:
- Single-stage rotary screw air-end
- Variable Frequency Drive motor control
- Electric motor and drive arrangement
- Air intake filtration system
- Compressor lubrication system in an oil-injected configuration
- Oil filtration arrangement
- Air-oil separation system
- Oil cooling arrangement
- Compressed-air aftercooling arrangement, where included
- Industrial electrical control panel
- Compressor operating and protection controls
- Enclosed compressor package, according to the selected configuration
- Maintenance access for routine servicing
The specific air-end manufacturer, motor efficiency class, VFD brand, controller model, enclosure protection rating and other component details should be confirmed in the approved technical quotation. They should not be assumed from the compressor horsepower or model number alone.
## Optional Features and Custom Configurations
Sarv Jagat can provide customised compressor configurations, accessories and complete compressed-air system integrations according to the customer's machinery, production process, operating pressure, air-quality requirements and installation conditions.
Available options may include:
**Air Treatment and Drying**
- Refrigerated air dryer
- Desiccant air dryer
- High-temperature refrigerated dryer, where required
- Moisture separator
- Automatic condensate drain
- Pre-filter and after-filter
- Fine particulate filtration
- Oil-removal filtration
- Activated-carbon filtration
**Air Storage and Distribution**
- Air receiver tank with suitable pressure rating
- Pressure-rated compressed-air piping
- Aluminium compressed-air distribution system
- Stainless-steel piping for selected applications
- Isolation valves and pressure-rated fittings
- Separate pressure-regulated distribution lines
**Monitoring and System Controls**
- Pressure gauges and pressure transmitters
- Airflow meters
- Dew-point monitoring instruments
- Differential pressure indicators for filters
- Automatic condensate management
- Remote monitoring and control integration, subject to controller compatibility
- Additional pressure-control arrangements
**Specialised System Integration**
- Multi-stage filtration arrangements
- Application-specific air-treatment systems
- Dedicated compressed-air lines for different production areas
- Special pressure-control configurations
- Oil-water condensate separators
- Customised receiver and dryer combinations
- Plant-level compressed-air monitoring arrangements
These options are selected according to the actual application and are not automatically included as standard equipment.
For 13 bar operation, all receivers, dryers, filters, valves, drains, piping, hoses and fittings must have appropriate pressure ratings. Their rated airflow capacity must also be suitable for the compressor's delivery.
Food, pharmaceutical, laboratory and critical process applications may require additional air-quality specifications, filtration stages, drying arrangements and validation. The compressor alone does not establish a particular compressed-air purity class.
## Technical Specifications
Model: SJ RV40
Product Type: Industrial Screw Air Compressor
Technology: Variable Frequency Drive (VFD) / Variable Speed
Compression Stage: Single Stage
Motor Power: 40 HP
Motor Power: 30 kW
Operating Pressure Configuration: 13 bar(g)
Pressure Equivalent: 190 PSI(g) / 1.3 MPa(g)
Air Delivery at 13 bar: 124 CFM
Air Delivery at 13 bar: 3.51 m³/min
Pressure-wise Air Delivery:
At 8 bar(g): 184 CFM / 5.21 m³/min
At 10 bar(g): 138 CFM / 3.91 m³/min
At 13 bar(g): 124 CFM / 3.51 m³/min
These airflow values are pressure-specific. For a system operating at 13 bar, use the specified 124 CFM delivery for compressor selection. The higher airflow values at 8 bar and 10 bar must not be treated as available delivery at 13 bar.
## Additional Industrial Applications
Beyond the applications covered in Part 2A, the SJ RV40 can be evaluated for selected machinery and processes in the following sectors. Suitability depends on actual equipment pressure, airflow consumption, air quality and operating duty.
### 1. Railway Workshop and Railway Component Manufacturing
Potential compressed-air applications include:
- Railway component assembly fixtures
- Bogie component manufacturing equipment
- Pneumatic riveting and fastening systems
- Railway workshop maintenance tools
- Pneumatic component cleaning stations
- Special-purpose railway equipment testing fixtures
- Selected railway component surface preparation equipment
Compressed-air systems used directly in train braking and other safety-critical railway functions require dedicated engineering and applicable railway standards. A general industrial compressor should not be assumed suitable for direct integration into a train braking system.
### 2. Electrical Equipment and Switchgear Manufacturing
Potential applications include:
- Pneumatic assembly fixtures
- Electrical enclosure manufacturing equipment
- Busbar fabrication support machinery
- Pneumatic riveting and fastening systems
- Switchgear component handling equipment
- Special-purpose electrical equipment assembly fixtures
- Pneumatic cleaning and maintenance stations
Compressed air may support selected assembly and manufacturing processes. Switchgear testing involving insulating gases, vacuum systems or high-voltage testing requires dedicated equipment and should not be confused with conventional compressed-air applications.
### 3. Industrial Filter and Filtration Equipment Manufacturing
Potential applications include:
- Filter cartridge manufacturing equipment
- Filter housing assembly fixtures
- Pneumatic clamping and sealing systems
- Dust collector component manufacturing equipment
- Industrial filter testing equipment designed for compressed air
- Pneumatic cleaning stations
- Special-purpose filtration machinery
Compressed-air pressure testing must use equipment and test arrangements specifically designed and rated for the applicable pressure. Hydrostatic liquid testing and compressed-air testing are different processes and must not be treated as interchangeable.
### 4. Textile and Technical Textile Machinery Manufacturing
Potential applications include:
- Textile machine assembly fixtures
- Technical textile processing equipment
- Pneumatic fabric handling mechanisms
- Pneumatic clamping and positioning systems
- Industrial textile packaging machinery
- Special-purpose textile machine testing stations
- Textile equipment maintenance tools
Most conventional textile production machinery operates at lower pneumatic pressure. The RV40 should be considered for a genuine higher-pressure requirement or as a central supply source with correctly regulated downstream distribution.
### 5. Mining and Mineral Processing Equipment
Potential applications include:
- Pneumatic mining maintenance tools
- Mineral-processing machinery actuators
- Conveyor maintenance equipment
- Industrial component cleaning stations
- Specialised pneumatic processing equipment
- Mining equipment assembly fixtures
- Selected surface preparation and maintenance systems
Large mining drills and underground pneumatic equipment can require substantially greater airflow than the RV40 provides. Hazardous-area requirements and equipment-specific pressure and consumption data must be verified before selection.
### 6. Industrial Maintenance and Plant Utility Systems
The RV40 can be evaluated for selected higher-pressure utility installations serving:
- Heavy equipment maintenance stations
- Specialised pneumatic servicing tools
- Intermittent industrial cleaning equipment
- Pneumatic assembly and repair workstations
- Component surface preparation stations
- Pressure-regulated pneumatic utility networks
- Selected production-line maintenance equipment
Where several pressure requirements exist, a properly engineered distribution system can provide separate regulated pressure zones. The combined demand must remain within the compressor's available delivery.
## Compressed-Air System Design Considerations
The compressor's rated pressure and airflow are only two parts of a complete compressed-air installation.
For the SJ RV40, the specified delivery at 13 bar is 124 CFM or 3.51 m³/min. The following engineering factors should be evaluated before finalising the system:
**Air Consumption:** Calculate the actual consumption of each connected machine, including continuous and intermittent demand.
**Simultaneous Demand:** Determine how many machines operate together during peak production conditions.
**Pressure Drop:** Account for losses through dryers, filters, separators, valves, hoses and distribution piping.
**Air Receiver Capacity:** Select receiver volume according to demand fluctuations, compressor control requirements and permissible pressure variation.
**Air Quality:** Establish the required particulate, moisture and oil-content limits for the connected processes.
**Operating Profile:** Assess production shifts, operating hours, idle periods and changes in compressed-air consumption.
**VFD Operating Range:** Ensure minimum and maximum plant demand are compatible with the compressor's designed variable-speed range. Extended operation outside the permitted range can affect control stability and equipment operation.
**Future Expansion:** Consider planned additional machinery and production requirements without assuming unused compressor capacity is automatically available under every operating condition.
If connected machines require lower pressure, correctly sized downstream regulators and separate distribution zones may be appropriate. Unnecessarily maintaining the entire network at 13 bar can increase energy consumption and compressed-air leakage losses.
## Compatible Compressed-Air Accessories
The SJ RV40 can be integrated with suitable compressed-air treatment, storage and distribution equipment according to the application.
Potential accessories include:
- Industrial refrigerated air dryer
- Desiccant compressed-air dryer
- Air receiver tank
- Moisture separator
- Pre-filter
- After-filter
- Fine particulate filter
- Oil-removal filter
- Activated-carbon filter
- Automatic condensate drain
- Oil-water separator
- Pressure regulator
- Pressure gauge
- Pressure transmitter
- Airflow meter
- Dew-point monitor
- Differential pressure indicator
- Pressure-rated aluminium air piping
- Industrial isolation valves and fittings
The dryer should be selected according to the required pressure dew point, inlet temperature, ambient conditions and actual airflow. Filters should be selected according to the required air-quality specification and their rated flow capacity.
All accessories must be suitable for the intended operating pressure. Components rated only for conventional 8–10 bar systems must not be installed in a 13 bar line unless their approved pressure rating permits that service.
## Frequently Asked Questions
**1. What is the air delivery of the SJ RV40 40 HP VFD compressor at 13 bar?**
The SJ RV40 is specified to deliver 124 CFM or 3.51 m³/min at 13 bar(g).
**2. What are the airflow ratings of the SJ RV40 at 8 bar and 10 bar?**
The official specification lists 184 CFM (5.21 m³/min) at 8 bar and 138 CFM (3.91 m³/min) at 10 bar. At 13 bar, the specified delivery is 124 CFM (3.51 m³/min).
**3. What is the difference between the SJ RV40 VFD compressor and a fixed-speed 40 HP screw compressor?**
The RV40 uses Variable Frequency Drive technology to adjust motor speed according to compressed-air demand within its designed operating range. A conventional fixed-speed compressor generally operates at a fixed motor speed during loaded operation and regulates capacity through its load/unload arrangement.
**4. Is the SJ RV40 suitable for industrial sandblasting?**
It can be evaluated for selected abrasive blasting installations. However, blasting airflow depends on nozzle diameter, operating pressure, abrasive type, hose dimensions and the number of active blasting stations. The combined consumption must remain within the compressor's rated delivery of 124 CFM at 13 bar.
**5. Can the SJ RV40 operate multiple heavy-duty pneumatic tools?**
It may support selected combinations of pneumatic tools where their combined pressure and airflow requirements remain within the available output. Large breakers, rock drills and multiple high-consumption tools can exceed its capacity, particularly during simultaneous operation.
**6. Can the SJ RV40 supply multiple industrial machines?**
Yes, if the combined simultaneous air consumption and pressure requirements are within the available compressor delivery. The system must also account for peak demand, pressure losses and required air quality.
**7. Can the SJ RV40 be used for CNC, VMC and industrial automation machinery?**
It can be evaluated as a central compressed-air source for suitable production installations. Most conventional CNC, VMC and automation pneumatic circuits operate at lower pressure, so downstream pressure regulation is generally required. The machinery manufacturer's pressure and consumption specifications should determine suitability.
**8. Does the VFD system reduce electricity consumption?**
VFD technology can reduce unnecessary compressor output during periods of lower air demand. Actual energy savings depend on the plant's demand profile, pressure settings, leakage, operating hours, compressor operating range and electrical configuration. A fixed percentage cannot be guaranteed without an energy assessment.
**9. Can the compressor be supplied with an air dryer and receiver tank?**
Yes. Suitable refrigerated or desiccant dryers, air receivers, moisture separators, filters and condensate-management equipment can be selected according to the system's airflow, pressure and air-quality requirements. All accessories must have suitable pressure ratings.
**10. Can the SJ RV40 be customised for a specific industrial application?**
Yes. Compressor configurations and supporting compressed-air equipment can be selected according to the customer's operating pressure, airflow demand, production conditions, air-quality requirements and installation layout. Optional accessories and system integrations should be confirmed in the approved technical offer.
**11. Is 13 bar suitable for every industrial pneumatic machine?**
No. Many industrial pneumatic machines are designed for lower pressures. Operating the entire distribution network at 13 bar without a genuine process requirement can increase energy consumption and leakage losses. Use the pressure specified by the machinery manufacturer and regulate downstream supply where required.
**12. What should be checked before selecting the SJ RV40?**
Verify the required operating pressure, total airflow consumption, simultaneous demand, peak load, duty cycle, air-quality requirement, pressure losses and electrical supply. For a 13 bar installation, use the specified 124 CFM delivery as the primary compressor capacity reference.
## Why Choose Sarv Jagat?
Sarv Jagat focuses on industrial compressed-air solutions, including rotary screw compressors, air-treatment equipment, storage systems and supporting compressed-air accessories.
The SJ RV40 combines a 40 HP motor rating with single-stage rotary screw compression and Variable Frequency Drive technology. Its specified delivery of 124 CFM at 13 bar makes it a model to evaluate for higher-pressure industrial pneumatic installations and manufacturing facilities with variable compressed-air demand.
Beyond the compressor package, customers can select suitable air dryers, receiver tanks, filtration systems, pressure regulation, condensate management, monitoring instruments and distribution piping according to their actual operating requirements.
The final system configuration should be based on verified machinery specifications, airflow demand, pressure requirements and compressed-air quality rather than horsepower alone.
Complementary Equipment
View All 84 ModelsRelated Industrial Screw Compressors
SJ RF 10Fixed

⚙️ Fixed Speed Drive
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.
Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
SJ RF 20Fixed

⚙️ Fixed Speed Drive
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.
Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m

