+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 25⚙️ Fixed Speed Direct Drive
25 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Power: 25 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 25

25 HP 13 Bar SJ Fixed Speed Screw Air Compressor

Buy a 25 HP 13 Bar Fixed Speed Screw Air Compressor with 18.5 kW motor power and 78 CFM airflow for specialized high-pressure pneumatic applications.

Motor Power25 HP18.5 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery78 CFM2.21 m³/min
Factory Price (Ex-Works)₹3,30,000
GST & Export Documentation Ready
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 25

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power25 HP / 18.5 kW
Working Pressure (Discharge)13 Bar / 190 PSI(g) / 1.3 MPa(g)
Free Air Delivery (FAD Capacity)78 CFM / 2.21 m³/min at 13 Bar
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level66 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)1250 x 850 x 1280 mm
Approx. Net Weight700 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
TechnologyOil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

25 HP 13 Bar SJ Fixed Speed Screw Air Compressor

The SJ RF25 is a 25 HP industrial fixed-speed rotary screw air compressor designed for applications requiring compressed air at a maximum operating pressure of 13 bar. With a motor rating of 18.5 kW and a specified airflow capacity of 78 CFM (2.21 m³/min) at 13 bar, it is intended for industrial operations where higher-pressure compressed air is required by specialised machinery, pneumatic equipment or production processes.

The SJ RF25 combines single-stage rotary screw compression technology with a fixed-speed drive arrangement. It is suitable for evaluating dedicated compressed-air installations in engineering workshops, specialised manufacturing facilities, surface preparation operations and industrial production areas where the connected equipment's pressure and airflow requirements match the compressor's rated capacity.

At 13 bar, the SJ RF25 delivers 78 CFM (2.21 m³/min). This airflow should be considered when selecting the number and type of connected machines. The total simultaneous demand, pressure losses through the distribution network and air-treatment equipment must be evaluated before finalising the compressor installation.

The compressor is part of the SJ R Series fixed-speed single-stage rotary screw range and is intended for industrial compressed-air supply applications where the required operating pressure justifies a 13 bar configuration.

WHY CHOOSE THIS CAPACITY?

The 25 HP capacity provides a higher rated motor power and airflow than the smaller 10 HP, 15 HP and 20 HP models in the same fixed-speed series. The SJ RF25 delivers 78 CFM at 13 bar, making it relevant to dedicated industrial systems with higher compressed-air demand than smaller machine groups can accommodate.

The SJ RF25 can be evaluated for:

• Dedicated production areas requiring compressed air at 13 bar.
• Specialised pneumatic machinery with higher-pressure requirements.
• Surface preparation equipment, subject to its specified pressure and airflow consumption.
• Engineering workshops operating compatible high-pressure pneumatic tools.
• Special-purpose machinery with higher-pressure pneumatic circuits.
• Industrial equipment testing and commissioning arrangements designed for compressed air.
• Production cells where combined machine demand remains within the available airflow.

KEY CAPACITY AND SELECTION DETAILS

Motor Power: 25 HP / 18.5 kW
Maximum Operating Pressure: 13 bar
Pressure Equivalent: 190 PSI(g) / 1.3 MPa(g)
Airflow at 13 bar: 78 CFM
Metric Airflow: 2.21 m³/min
Compression Technology: Single-stage rotary screw
Drive Arrangement: Fixed speed

AIRFLOW AT DIFFERENT OPERATING PRESSURES

The official SJ RF25 specification lists the following airflow capacities:

8 bar: 113 CFM / 3.19 m³/min
10 bar: 95 CFM / 2.69 m³/min
13 bar: 78 CFM / 2.21 m³/min

These values correspond to different operating-pressure ratings. For an application requiring 13 bar, use the rated airflow of 78 CFM (2.21 m³/min). The higher airflow figures at 8 bar and 10 bar must not be used for sizing a 13 bar compressed-air system.

Selecting a compressor with a higher pressure rating does not automatically improve system efficiency. If the connected machinery requires only 7–8 bar, operating at 13 bar may increase energy consumption unnecessarily. The correct selection is the lowest pressure that reliably satisfies the actual process requirement, after accounting for pressure losses.

Where a 13 bar main supply serves equipment requiring lower pressure, suitable downstream pressure regulators should be installed.

ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF25 uses single-stage rotary screw compression technology. The compression element operates through two intermeshing helical rotors that progressively reduce the volume of trapped air and increase its pressure.

The rotary screw compression process involves the following functional stages:

1. AIR INTAKE AND FILTRATION

Ambient air enters through the compressor's intake arrangement. The intake filter helps prevent airborne dust and particles from entering the compression element. Filter condition is important because excessive contamination can affect compressor performance and component life.

2. ROTARY SCREW COMPRESSION

Air enters the compression chamber formed by the rotating screw profiles. As the rotors turn, the available volume progressively decreases and the air pressure increases.

The compression element is selected for the compressor's specified operating conditions. Correct operation depends on maintaining the recommended service intervals, operating conditions and lubrication requirements.

3. LUBRICATION AND AIR-OIL SEPARATION

For an oil-injected screw compressor configuration, lubricating oil performs important functions such as sealing, cooling and lubrication within the compression element.

The air-oil separation arrangement separates oil from the compressed-air stream before delivery. Downstream filtration may still be necessary depending on the required air-quality specification and the sensitivity of the connected process.

4. COOLING AND TEMPERATURE MANAGEMENT

Compression generates heat that must be managed through the compressor's cooling arrangement. Oil cooling and compressed-air aftercooling functions may be provided according to the supplied configuration.

Proper ventilation and clean cooling surfaces are important for maintaining operating temperatures within the equipment's designed limits.

5. COMPRESSED-AIR DELIVERY

After compression and the relevant separation process, compressed air is delivered through the outlet connection to the downstream system.

Depending on the application, the installation may include an air receiver, moisture separator, refrigerated or desiccant air dryer, filtration stages, automatic drains and a pressure-rated distribution network.

The final air-treatment arrangement should be selected according to the required pressure dew point, particulate and oil-content limits, and the compressed-air quality required by the connected machinery.

FIXED SPEED OPERATING TECHNOLOGY

The SJ RF25 is a fixed-speed rotary screw air compressor. Its motor operates at a defined rotational speed during loaded operation rather than continuously adjusting its speed according to changing air demand.

In a typical fixed-speed load/unload control arrangement, the compressor responds to changes in system pressure:

• When system pressure falls to the configured loading point, the compressor enters its loaded operating condition and supplies compressed air.
• When system pressure reaches the configured unloading point, the compressor reduces or stops compression loading according to its control arrangement.
• The controller manages operating conditions and protective functions according to the supplied configuration.

Fixed-speed compressors are generally considered for production systems where compressed-air demand is reasonably stable and predictable. However, the actual operating cost depends on the load profile, operating hours, unloading frequency, system pressure and leakage.

IMPORTANT OPERATING CONSIDERATIONS

Before selecting the SJ RF25, evaluate:

• Average and peak compressed-air consumption.
• Total simultaneous airflow demand of connected machinery.
• Required pressure at the machine inlet.
• Pressure drop through filters, dryers, piping and fittings.
• Operating hours per day and production shifts.
• Frequency of compressor loading and unloading.
• Air leakage and unnecessary compressed-air consumption.
• Required compressed-air quality.

For applications with substantial demand variation, a VFD compressor may also be evaluated. A VFD changes motor speed within its designed operating range to respond to changing demand. The commercial decision should be based on measured consumption, operating hours, energy cost and capital investment.

PREMIUM INDUSTRIAL COMPONENTS

The performance and reliability of an industrial screw compressor depend on the complete machine configuration rather than motor power alone. The compression element, motor, lubrication circuit, air-oil separation system, cooling arrangement and electrical controls must work together within their specified operating limits.

The SJ RF25 can be evaluated around the following functional component groups. Final brands, models and component specifications should be confirmed in the approved technical quotation.

1. ROTARY SCREW AIR END

The air end performs the rotary screw compression process. Its selection must be compatible with the specified 13 bar operating pressure and the rated airflow requirement of 78 CFM (2.21 m³/min).

2. INDUSTRIAL DRIVE MOTOR

The motor supplies mechanical power to the compressor's drive arrangement. The SJ RF25 has a specified motor rating of 25 HP / 18.5 kW.

Motor voltage, frequency, efficiency class, protection rating and insulation details should be checked against the supplied motor nameplate and technical documentation.

3. AIR INTAKE FILTER

The intake filtration system helps prevent dust and airborne particles from entering the compression element. Inspection and replacement intervals should be adjusted according to actual site conditions, especially in dusty manufacturing environments.

4. LUBRICATION SYSTEM

In an oil-injected configuration, the lubrication circuit supplies the oil required for sealing, cooling and lubrication within the compression element. Correct oil grade, operating level and scheduled maintenance are essential.

5. OIL FILTER

The oil filter removes contaminants from circulating lubricating oil and supports the cleanliness of the lubrication circuit.

6. AIR-OIL SEPARATOR ELEMENT

The separator element reduces oil carryover from the compressed-air stream in an oil-injected screw compressor. Its condition should be monitored and replacement carried out according to the manufacturer's service recommendations.

7. COOLING SYSTEM

The cooling arrangement manages heat generated during compression. Its condition, ventilation and cleanliness are important for stable operation under the intended operating conditions.

8. ELECTRICAL CONTROL AND PROTECTION

The electrical control arrangement manages compressor operation and protective functions according to the supplied controller and electrical configuration. Actual monitoring, alarms and protection functions should be confirmed in the approved machine documentation.

FINAL CONFIGURATION NOTE

The exact air-end make, motor brand, controller model, electrical protection devices, cooling arrangement and supplied accessories may vary according to the approved configuration.

For a technically suitable installation, the SJ RF25 should be evaluated using its rated 13 bar airflow of 78 CFM, the connected machinery's actual pressure requirement and the required compressed-air quality.

HEAVY-DUTY COOLING SYSTEM

The cooling system is an essential part of the SJ RF25's thermal management arrangement. Compression generates heat, and the cooling system helps maintain operating temperatures within the compressor's designed limits.

Depending on the supplied configuration, the cooling arrangement may include:

• Oil cooler for controlling lubricating oil temperature in an oil-injected configuration.
• Aftercooler for reducing compressed-air temperature before downstream distribution.
• Cooling fan for moving air through the heat-exchanger surfaces.
• Ventilation openings for cooling-air intake and hot-air discharge.
• Temperature monitoring and protective functions, subject to controller configuration.

For reliable operation, install the compressor in a properly ventilated location with sufficient clearance around its air intake and hot-air discharge areas. Avoid recirculation of hot cooling air into the compressor room.

Recommended installation considerations:

• Maintain the manufacturer's specified ventilation clearance.
• Keep cooling surfaces and ventilation openings free from dust and obstruction.
• Avoid locations exposed to excessive ambient heat.
• Provide sufficient room ventilation for the heat rejected by the compressor.
• Inspect the cooling arrangement periodically, particularly in dusty industrial environments.

INTELLIGENT ELECTRICAL & SAFETY FEATURES

The electrical and safety arrangement supports controlled compressor operation and helps protect the machine against operating conditions outside its designed limits.

Depending on the supplied controller and electrical configuration, functional systems may include:

• Compressor start/stop control.
• Load/unload operating control.
• System pressure monitoring.
• Temperature monitoring.
• Motor overload protection.
• Phase failure or phase-sequence protection, where provided.
• Emergency stop arrangement.
• Operating status and alarm indication.
• Maintenance alerts, where supported by the controller.

The actual controller functions, alarm parameters, electrical protection devices and monitoring features must be confirmed in the approved technical quotation.

The electrical installation should be checked against the motor nameplate and approved electrical drawings. Cable sizing, circuit protection, earthing and isolator selection should be completed by a qualified electrical professional.

STANDARD FEATURES

The SJ RF25 is a 25 HP fixed-speed rotary screw air compressor designed for industrial applications requiring a maximum operating pressure of 13 bar.

Its principal rated specifications and functional systems include:

• 25 HP / 18.5 kW motor rating.
• Single-stage rotary screw compression technology.
• Fixed-speed drive arrangement.
• Maximum operating pressure of 13 bar.
• Pressure equivalent of 190 PSI(g) / 1.3 MPa(g).
• Airflow of 78 CFM / 2.21 m³/min at 13 bar.
• Air intake filtration arrangement.
• Lubrication system for an oil-injected configuration.
• Oil filtration arrangement.
• Air-oil separation system for an oil-injected configuration.
• Cooling arrangement.
• Electrical control and motor protection arrangement.
• Compressed-air outlet connection.

Exact hardware, component brands and supplied accessories are subject to the approved machine configuration.

OPTIONAL FEATURES AND COMPRESSED-AIR SYSTEM ACCESSORIES

The following equipment can be considered when designing a complete compressed-air installation around the SJ RF25. These items should not be assumed to be included with the compressor unless specifically listed in the quotation.

1. AIR RECEIVER TANK

A suitably rated air receiver stores compressed air, helps manage short-duration demand fluctuations and provides additional system volume.

The receiver should be selected according to:
• Required storage volume.
• Maximum operating pressure.
• Compressor delivery and demand profile.
• Applicable pressure-vessel regulations.
• Installation and safety requirements.

For a 13 bar installation, the receiver and its fittings must have an appropriate pressure rating.

2. REFRIGERATED AIR DRYER

A refrigerated air dryer reduces moisture in compressed air by cooling the air and separating condensed water.

Selection should consider:
• Actual inlet airflow.
• Operating pressure.
• Inlet air temperature.
• Ambient temperature.
• Required pressure dew point.
• Allowable pressure drop.

The dryer must be correctly sized for the installation and rated for its operating pressure. Do not select a dryer solely from the compressor's HP rating.

3. DESICCANT AIR DRYER

A desiccant dryer can be considered when the application requires a lower pressure dew point than a refrigerated dryer can provide.

It may be relevant to specialised pneumatic equipment, moisture-sensitive manufacturing processes and applications requiring dry compressed air.

The system design must account for purge-air consumption, inlet conditions, operating pressure and the required outlet dew point.

4. MOISTURE SEPARATOR

A moisture separator removes bulk liquid condensate from compressed air. It can be installed upstream of downstream air-treatment equipment to reduce the liquid-water load entering filters and dryers.

5. PRE-FILTER AND AFTER-FILTER

Compressed-air filters remove particles and liquid aerosols according to their filtration grade.

Filter selection should be based on:
• Required air-quality class.
• Particle and aerosol removal requirements.
• Rated airflow.
• Operating pressure.
• Permissible pressure drop.

6. MICRO-FILTER

A micro-filter provides finer filtration where the application requires additional removal of oil aerosols and particles. Its filtration performance must match the specified air-quality requirement.

7. ACTIVATED CARBON FILTER

An activated carbon filter can reduce oil vapour and certain odours in compressed air. It is used where the application requires this level of treatment.

It does not replace particulate filtration, aerosol filtration or a correctly selected air dryer.

8. AUTOMATIC CONDENSATE DRAIN

Automatic condensate drains remove collected water from receivers, filters, separators and dryers.

Correct drain selection, installation and maintenance help prevent condensate accumulation and unnecessary compressed-air losses.

9. OIL-WATER SEPARATOR

An oil-water separator can be used to treat oil-containing compressor condensate before disposal, subject to applicable environmental and local discharge requirements.

10. COMPRESSED-AIR DISTRIBUTION PIPING

A properly designed aluminium or other approved compressed-air piping system distributes air to production areas.

Pipe sizing should consider:
• Total airflow.
• Pipe length.
• Number of bends and fittings.
• Allowable pressure drop.
• Operating pressure.
• Future expansion requirements.

11. PRESSURE REGULATORS AND LINE ACCESSORIES

Pressure regulators, isolation valves, pressure gauges and suitably rated hoses can be installed to control and distribute air according to individual machine requirements.

Where equipment requires less than 13 bar, suitable downstream pressure regulation is necessary.

12. AIRFLOW METER AND DEW POINT MONITOR

An airflow meter helps monitor compressed-air consumption and identify demand variations or abnormal usage.

A dew point monitor can be installed where moisture control is critical to production quality.

IMPORTANT 13 BAR SYSTEM DESIGN REQUIREMENTS

The SJ RF25 delivers 78 CFM (2.21 m³/min) at 13 bar according to its specified model rating. The complete compressed-air installation must be designed for the actual operating pressure, airflow and air-quality requirements.

For a 13 bar system, verify the pressure rating of every component exposed to compressed air, including:

• Air receiver and associated fittings.
• Refrigerated or desiccant air dryer.
• Moisture separators and filters.
• Condensate drains.
• Distribution pipes and connectors.
• Isolation valves and pressure regulators.
• Flexible hoses and machine connections.
• Pressure gauges and transmitters.
• Safety valves and other pressure-protection devices.

Components rated only for conventional 8 bar or 10 bar systems must not be used at 13 bar unless their manufacturer confirms suitability for the actual maximum pressure and applicable design conditions.

A pressure regulator should be installed where downstream machinery requires a lower pressure than the main distribution header.

INDUSTRIAL APPLICATIONS

The SJ RF25 can be evaluated for industrial applications requiring higher-pressure compressed air, with a rated airflow of 78 CFM (2.21 m³/min) at 13 bar.

Its application suitability depends on the machinery manufacturer's specified pressure, actual airflow consumption, duty cycle, air-quality requirement and simultaneous demand.

The following are potential application areas, subject to technical verification.

1. ABRASIVE BLASTING AND SURFACE PREPARATION

Potential applications include:

• Portable abrasive blasting machines.
• Pressure blast pots.
• Industrial sandblasting equipment.
• Pneumatic abrasive media conveying arrangements.
• Specialised surface preparation stations.
• Blast-room pneumatic equipment.

Abrasive blasting equipment can have substantial airflow demand. Nozzle diameter, blasting pressure, nozzle wear, blast-pot design and operating duration directly affect consumption.

The SJ RF25 should be selected only after checking the blasting machine's actual CFM requirement at the specified pressure. A 78 CFM supply may be suitable for a particular nozzle and operating arrangement but cannot be assumed to support every blasting setup.

2. HEAVY-DUTY PNEUMATIC TOOLS

Potential applications include:

• Industrial impact wrenches.
• Heavy-duty pneumatic riveting tools.
• Pneumatic chipping hammers.
• Specialised air-operated fastening tools.
• Industrial pneumatic cutting equipment.
• Selected high-pressure air-driven maintenance tools.

Tool selection must consider the manufacturer's rated inlet pressure and air consumption. Many pneumatic tools operate below 13 bar, so a pressure regulator may be required.

3. CONCRETE BATCHING AND CONSTRUCTION EQUIPMENT

Potential applications include:

• Pneumatic gate and valve actuation systems.
• Cement silo aeration equipment where the OEM specifies compatible pressure.
• Selected pneumatic conveying arrangements.
• Specialised construction machinery using higher-pressure pneumatic circuits.
• Industrial material-handling actuators.

Cement conveying and silo aeration systems can require different pressure and airflow conditions depending on equipment design. The compressor should not be selected without checking the OEM's required operating point and consumption.

4. ENGINEERING AND METAL FABRICATION WORKSHOPS

Potential applications include:

• Specialised pneumatic fabrication equipment.
• Industrial riveting stations.
• Pneumatic clamping fixtures.
• Higher-pressure machine-actuation circuits.
• Specialised maintenance tools.
• Selected compressed-air cleaning equipment.

Conventional fabrication tools often operate at lower pressure. A 13 bar supply is relevant only where the connected equipment specifically requires it.

5. SPECIAL-PURPOSE MACHINERY AND AUTOMATION

Potential applications include:

• Special-purpose machine pneumatic circuits.
• Higher-pressure pneumatic clamping fixtures.
• Specialised indexing and positioning mechanisms.
• Pneumatic locking and release systems.
• Automated assembly stations with specified higher-pressure circuits.
• Specialised industrial actuator systems.

Many standard automation cylinders, robotic grippers and pneumatic control systems operate at lower pressures. Their OEM pressure specifications must be checked before connecting them to a 13 bar supply.

6. PNEUMATIC COMPONENT MANUFACTURING AND TESTING

Potential applications include:

• Pneumatic actuator assembly equipment.
• Specialised pneumatic valve manufacturing machinery.
• Pneumatic component functional test benches.
• Selected compressed-air-operated assembly fixtures.
• Pneumatic control-unit testing equipment.

The test pressure, test medium and safety arrangement must be verified for each test bench. A 13 bar compressor is not automatically suitable for every pressure-testing process.

7. INDUSTRIAL MACHINE TESTING AND COMMISSIONING

Potential applications include:

• OEM machine commissioning rigs.
• Pneumatic circuit leak-detection arrangements.
• Selected actuator performance test benches.
• Compressed-air-operated functional testing equipment.
• Specialised pneumatic control-panel testing setups.

Compressed-air leak testing and pneumatic testing can involve significant stored energy. Testing procedures must be engineered with suitable pressure controls, protective barriers, exclusion zones and safety devices.

8. SPECIALISED PACKAGING AND PROCESS MACHINERY

Potential applications include:

• Packaging-machine pneumatic circuits requiring higher pressure.
• Specialised sealing and actuation mechanisms.
• Pneumatic material-handling equipment.
• Selected industrial dispensing and dosing machine actuators.
• Specialised production-line mechanisms using higher-pressure compressed air.

Most conventional packaging machines operate at lower pressures. A 13 bar compressor should be considered only where the machine OEM identifies a genuine higher-pressure requirement.

9. SELECTED AUTOMOTIVE AND ENGINEERING PRODUCTION

Potential applications include:

• Specialised automotive assembly fixtures.
• Higher-pressure pneumatic clamping circuits.
• Selected component manufacturing equipment.
• Pneumatic actuator test stations.
• Specialised machine-tool auxiliary circuits.
• Industrial fastening and riveting equipment.

Standard CNC and VMC machines generally use lower-pressure compressed air for common pneumatic functions such as tool changing, clamping and purging. A 13 bar supply should not be selected for these functions unless the OEM documentation specifically requires it.

10. INDUSTRIAL CLEANING AND PURGING

Potential applications include:

• Selected high-pressure compressed-air purging arrangements.
• Specialised pneumatic cleaning equipment.
• Machine maintenance blow-off systems designed for the specified pressure.
• Industrial equipment drying and purging operations where air quality is suitable.

Compressed-air blow-off must use appropriate safety nozzles, pressure controls and protective measures. Never direct compressed air at a person.

APPLICATION CAPACITY AND SELECTION NOTE

The SJ RF25 provides 78 CFM at 13 bar. This figure must be compared with the combined simultaneous demand of connected equipment.

A basic demand calculation is:

Total simultaneous demand = Sum of individual machine airflow consumption operating at the same time.

The system assessment must then account for:
• Leakage.
• Pressure drop through piping and treatment equipment.
• Dryer purge consumption, where applicable.
• Demand fluctuations.
• Required operating reserve.

A 25 HP rating alone does not establish how many machines the compressor can operate. The actual airflow requirement at the required pressure is the controlling selection parameter.

Hydraulic presses, hydraulic power packs and hydrostatic pressure-testing systems generally use liquid-based hydraulic or hydrostatic systems. They should not be treated as ordinary compressed-air applications.

TECHNICAL SPECIFICATIONS

Product: SJ RF25 Fixed Speed Screw Air Compressor
Model: SJ RF25
Motor Power: 25 HP
Motor Rating: 18.5 kW
Compression Technology: Rotary Screw
Compression Stage: Single Stage
Drive Technology: Fixed Speed
Maximum Operating Pressure: 13 bar(g)
Pressure Equivalent: 190 PSI(g)
Pressure Equivalent: 1.3 MPa(g)
Airflow at 13 bar: 78 CFM
Airflow at 13 bar: 2.21 m³/min

AIRFLOW AT DIFFERENT OPERATING PRESSURES

8 bar: 113 CFM / 3.19 m³/min
10 bar: 95 CFM / 2.69 m³/min
13 bar: 78 CFM / 2.21 m³/min

These airflow figures correspond to different operating-pressure ratings. For a system requiring 13 bar, use the 13 bar rating of 78 CFM (2.21 m³/min).

FREQUENTLY ASKED QUESTIONS

Q1. What is the motor power of the SJ RF25 screw air compressor?

The SJ RF25 is a 25 HP industrial screw air compressor with a specified motor rating of 18.5 kW.

Q2. What is the maximum operating pressure of the SJ RF25?

The specified maximum operating pressure is 13 bar(g), equivalent to 190 PSI(g) or 1.3 MPa(g).

Q3. What is the airflow capacity of the SJ RF25 at 13 bar?

The specified airflow at 13 bar is 78 CFM or 2.21 m³/min.

Q4. Is the SJ RF25 a fixed-speed or VFD compressor?

The SJ RF25 described here is a fixed-speed rotary screw compressor. Its motor operates at a defined rotational speed during loaded operation.

Q5. What is the airflow capacity at 8 bar and 10 bar?

The official specification lists 113 CFM (3.19 m³/min) at 8 bar and 95 CFM (2.69 m³/min) at 10 bar. At 13 bar, the rated airflow is 78 CFM (2.21 m³/min).

Q6. Can the SJ RF25 be used for sandblasting?

It can be evaluated for abrasive blasting equipment if the machine's required pressure and airflow are within the compressor's available delivery. Check the blast nozzle size, blasting pressure and continuous air consumption before selecting the compressor.

Q7. Can this compressor operate heavy-duty pneumatic tools?

It may supply compatible industrial pneumatic tools when their specified pressure and airflow requirements match the compressor's delivery. A pressure regulator may be required for tools designed to operate below 13 bar.

Q8. Can the SJ RF25 operate multiple machines simultaneously?

Yes, provided their combined simultaneous airflow demand and pressure requirements remain within the available system capacity. At 13 bar, the specified airflow is 78 CFM. The system design must also account for pressure drop, leakage and demand variation.

Q9. Which air dryer is suitable for the SJ RF25?

A refrigerated or desiccant air dryer may be selected according to the required pressure dew point, inlet conditions and actual airflow. The dryer must be sized for the installation and rated for the system's operating pressure.

Q10. Does the SJ RF25 include an air receiver tank and air dryer?

The air receiver, dryer, filters and other downstream accessories should be confirmed in the approved quotation. They should not be assumed to be included unless specifically listed.

Q11. Can the SJ RF25 be used for hydraulic pressure testing?

No. Hydraulic pressure testing normally uses a liquid-based hydraulic test system. Compressed-air testing is a different process and requires a separately engineered arrangement with appropriate safety measures.

Q12. What should be checked before installing a 13 bar compressor?

Verify the actual machine pressure and airflow requirements, pressure ratings of the receiver, dryer, filters, piping, valves and hoses, electrical supply, ventilation and safety arrangements. Install downstream pressure regulation wherever connected equipment requires lower pressure.

WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial compressed-air solutions covering screw air compressors, reciprocating air compressors, air receiver tanks, refrigerated air dryers, filtration equipment, spare parts and service support.

The SJ RF25 is designed for evaluation in applications where a 25 HP fixed-speed compressor with a specified 13 bar operating-pressure capability and 78 CFM airflow is appropriate.

A suitable compressed-air installation requires more than selecting motor power. Pressure, airflow, air quality, operating hours, machine demand and downstream equipment ratings must all be considered.

Sarv Jagat can help evaluate the compressed-air requirement and identify a suitable compressor, air receiver, dryer, filtration arrangement and distribution accessories.

For technical evaluation or a quotation, share:

• Required operating pressure in bar.
• Total airflow requirement in CFM or m³/min.
• Connected machinery and application.
• Required air quality or pressure dew point.
• Operating hours and production schedule.
• Air receiver and air dryer requirements.

SARV JAGAT CORPORATION
Industrial Air Compressors | Manufacturing | Sales | Spares | Service | Export
Ahmedabad, Gujarat, India
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote