+91-9157487233
𝕏
Back to Products Catalogue
SJ RF 220⚙️ Fixed Speed Direct Drive
220 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Power: 220 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 220

220 HP 13 Bar SJ Fixed Speed Screw Air Compressor

Buy a 220 HP fixed speed screw air compressor with 13 bar pressure and 740 CFM airflow. Designed for evaluating large-scale industrial compressed air systems.

Motor Power220 HP160 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery740 CFM20.95 m³/min
Core Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
WhatsApp Engineer
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet

ENGINEERING SPECIFICATIONS — SJ RF 220

Tested to IS 5456 & ISO 1217 Standard
Specification ParameterCertified Engineering Rating
Motor Power220 HP / 160 kW
Working Pressure (Discharge)13 bar(g) / 190 PSI(g) / 1.3 MPa(g)
Free Air Delivery (FAD Capacity)740 CFM / 20.95 m³/min
Drive TypeFixed Speed (Direct Driven)
Cooling SystemOversized Vacuum-Brazed Aluminum Heat Exchanger
Micro-Controller PLCMAM-880 Intelligent Micro-Computer with RS-485 Modbus
Electrical Grid Compatibility415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available)
Operating Sound Level74 ± 2 dB(A) Acoustic Enclosure
Unit Dimensions (L × W × H)2200 x 1400 x 1850 mm
Approx. Net Weight4990 kg
Cooling MethodHigh Efficiency Air Cooled
Voltage & Frequency415V ±10% / 3-Phase / 50 Hz
StageSingle Stage
TypeFixed Speed
Technology Oil Injected Rotary Screw
DriveDirect Driven
Technical Documentation & Plant Application Guide

PRODUCT OVERVIEW & ENGINEERING GUIDE

Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper

220 HP 13 Bar SJ Fixed Speed Screw Air Compressor 

The SJ RF220 is a high-capacity industrial fixed-speed rotary screw air compressor designed for large-scale compressed air installations requiring substantial airflow at elevated operating pressure.

With a motor rating of 220 HP (160 kW) and rated air delivery of 740 CFM (20.95 m³/min) at 13 bar, this model is intended for evaluating demanding industrial applications involving large pneumatic systems, multi-point abrasive blasting facilities, shipyard operations, heavy engineering, mining support and centralized compressed air networks.

At this capacity, compressor selection becomes a major part of plant utility engineering. The compressor must be evaluated alongside the complete air distribution and treatment infrastructure, including receiver storage, dryer capacity, filtration, pipeline sizing, pressure losses and simultaneous equipment consumption.

The SJ RF220 combines single-stage rotary screw compression technology with a fixed-speed operating arrangement and a 13 bar pressure configuration.

Its rated airflow makes it relevant for industrial facilities requiring a substantial volume of compressed air, provided the connected machinery genuinely requires the available operating pressure.

PRODUCT CONFIGURATION

Model: SJ RF220
Motor Power: 220 HP
Motor Rating: 160 kW
Operating Pressure: 13 bar(g)
Pressure Equivalent: 190 PSI(g)
Rated Air Delivery: 740 CFM
Air Delivery: 20.95 m³/min
Compression Technology: Single Stage Rotary Screw
Operating Technology: Fixed Speed


WHY CHOOSE THIS CAPACITY?

The 220 HP capacity is intended for evaluating large industrial compressed air requirements where multiple high-consumption processes operate simultaneously or where individual production systems require substantial airflow.

The SJ RF220 delivers 740 CFM at 13 bar, making it relevant for assessing large centralized compressed air installations and demanding pneumatic applications.

Potential application areas include:

• Large multi-nozzle abrasive blasting facilities.
• Shipyard and offshore structure surface preparation.
• Heavy engineering and steel fabrication plants.
• Mining and quarrying pneumatic equipment.
• Large industrial pneumatic conveying systems.
• Centralized high-pressure compressed air stations.
• Specialized high-consumption production machinery.
• Multiple industrial pneumatic equipment zones.
• Large-scale maintenance and utility air networks.

At 220 HP, the compressed air system should be designed around measured demand rather than simply the number of connected machines.

Important selection parameters include:

• Total connected airflow requirement.
• Simultaneous operating demand.
• Required pressure at individual equipment connections.
• Peak consumption and demand fluctuations.
• Pressure losses through dryers, filters and piping.
• Compressed air quality requirements.
• Operating hours and duty profile.
• Future production expansion.

For applications requiring 13 bar at the point of use, pressure losses across the treatment and distribution network must be considered when establishing the required compressor discharge pressure.

A higher-capacity compressor does not automatically guarantee adequate pressure at every machine. The complete system must be engineered to deliver the required airflow at the actual point of consumption.

The 13 bar configuration should be selected only where the connected machinery or production process genuinely requires elevated pressure. Operating at unnecessarily high pressure can increase electrical energy consumption.


ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY

The SJ RF220 uses single-stage rotary screw compression technology for industrial compressed air generation.

The compression element operates through the interaction of two precision-engineered screw rotors rotating inside a compression housing.

Atmospheric air enters through the intake system and becomes trapped between the rotor profiles and casing. As the rotors rotate, the trapped air moves along the compression chamber while its available volume decreases, resulting in an increase in air pressure.

The compressed air then moves towards the discharge side of the compression element.

This technology is widely used in industrial compressed air systems requiring substantial airflow and sustained air availability.

The main functional assemblies include:

• ROTARY SCREW COMPRESSION ELEMENT: Generates compressed air through the rotating screw rotor arrangement.
• AIR INTAKE SYSTEM: Supplies incoming atmospheric air to the compression element.
• LUBRICATION SYSTEM: Supports lubrication and thermal management in oil-injected configurations.
• AIR-OIL SEPARATION SYSTEM: Separates compressor oil from compressed air in oil-injected configurations.
• COOLING ARRANGEMENT: Manages heat generated during compression.
• DISCHARGE SYSTEM: Transfers compressed air towards the downstream installation.

For a 220 HP compressor, the condition of the compression element, lubrication circuit, air intake and cooling system is particularly important for maintaining the intended operating performance.

Maintenance deficiencies such as restricted intake filtration, degraded lubricant, separator deterioration or inadequate cooling can affect operating temperature, reliability and maintenance costs.

The exact compression element design, lubrication arrangement and supplied component configuration should be confirmed from the machine's approved technical documentation.


FIXED SPEED OPERATING TECHNOLOGY

The SJ RF220 is a fixed-speed rotary screw air compressor.

During loaded operation, its motor runs at its designated operating speed. Compressor capacity is generally managed through a load/unload control arrangement according to configured system pressure.

The operating sequence typically involves two main conditions:

LOADED OPERATION

When system pressure falls to the configured loading threshold, the compressor enters its loaded condition and supplies compressed air to the connected system.

UNLOADED OPERATION

When system pressure reaches the configured unloading threshold, the compressor changes its operating condition according to the controller and unloading arrangement.

This operating arrangement is commonly used in industrial facilities with relatively stable compressed air consumption.

KEY OPERATING CHARACTERISTICS:

• Fixed motor speed during loaded operation.
• Load/unload-based capacity regulation.
• Suitable for evaluating sustained industrial air demand.
• Operating pressure managed through configured control settings.
• No continuous motor-speed modulation as in a VFD compressor.

ENERGY AND OPERATING CONSIDERATIONS

For a 220 HP compressor, electricity consumption represents a significant part of the total operating cost.

The actual energy performance depends on the plant's air-demand profile, compressor loading pattern, discharge pressure, operating hours and maintenance condition.

Important operating considerations include:

• Loaded and unloaded operating hours.
• Actual compressed air consumption.
• Pressure losses throughout the distribution network.
• Leakage from pipelines, couplings and pneumatic equipment.
• Intake filter and cooler condition.
• Required discharge pressure.
• Air demand during production and non-production periods.

In applications with highly fluctuating air consumption, frequent loading and unloading or extended unloaded operation may affect overall energy performance.

A fixed-speed compressor should therefore be evaluated against the facility's demand profile.

For plants with variable demand, a combination of fixed-speed and VFD compressors can also be assessed as part of a centralized compressor-room strategy.

The 13 bar configuration should not be operated at unnecessarily high pressure when connected equipment can perform at a lower pressure.


PREMIUM INDUSTRIAL COMPONENTS & ENGINEERING CONFIGURATION

A 220 HP industrial screw compressor requires coordinated engineering across the compression element, electric motor, lubrication, cooling, air-oil separation and electrical systems.

The SJ RF220 configuration can be evaluated around the following major functional assemblies:

1. HIGH-CAPACITY ROTARY SCREW AIR END

The compression element is the central assembly responsible for generating compressed air.

Its rotor geometry, operating speed, lubrication arrangement and thermal operating limits influence compressor performance.

Air-end selection should be confirmed against the specified 220 HP and 13 bar operating configuration.

2. INDUSTRIAL ELECTRIC MOTOR

The compressor has a 220 HP / 160 kW motor rating.

Motor selection and installation should account for:

• Rated voltage and frequency.
• Full-load current.
• Starting characteristics.
• Insulation class.
• Protection rating.
• Motor efficiency.
• Operating environment.

Motor efficiency class and enclosure specifications should be verified from the actual motor datasheet rather than assumed from the compressor horsepower.

3. HEAVY-DUTY AIR INTAKE FILTRATION

The intake filtration system removes airborne particulate matter before air enters the compression element.

In large industrial facilities, dust concentration and operating conditions can influence filter loading and replacement frequency.

Restricted intake filtration can affect compressor operation. Filter inspection and replacement should follow the manufacturer's maintenance instructions.

4. LUBRICATION AND OIL FILTRATION SYSTEM

For oil-injected configurations, compressor oil performs lubrication, cooling and sealing functions within the compression system.

The oil filter helps remove contaminants from circulating lubricant and protects critical components.

Oil grade, oil quantity, filtration arrangement and replacement intervals should follow the supplied compressor manufacturer's specifications.

5. AIR-OIL SEPARATOR ELEMENT

The air-oil separator system reduces oil carryover in compressed air from oil-injected screw compressor configurations.

Separator condition is important for maintaining compressed air quality and avoiding abnormal oil consumption or carryover.

The correct separator element must be selected according to the supplied compressor configuration.

6. INDUSTRIAL COOLING ASSEMBLY

The cooling arrangement manages heat generated during compression and supports the operating temperature requirements of the compressor.

Oil cooling and compressed air aftercooling functions should be considered according to the actual machine design.

7. ELECTRICAL CONTROL PANEL

The electrical control arrangement manages compressor operation and provides configured protection and monitoring functions.

Controller type, pressure sensors, temperature sensors, protection settings and electrical components should be confirmed in the approved technical configuration.

8. INDUSTRIAL ENCLOSURE AND MAINTENANCE ACCESS

The enclosure and internal equipment arrangement should provide suitable access for inspection, routine maintenance and servicing.

A 220 HP installation requires adequate machine-room space, ventilation, electrical infrastructure and maintenance access.

COMPONENT CONFIGURATION NOTE:

Actual component brands, motor specifications, controller model, drive arrangement, cooling configuration and included accessories should be confirmed in the approved technical quotation. No specific component brand or optional feature should be assumed unless it is listed in the supplied configuration.

HEAVY DUTY COOLING SYSTEM

The SJ RF220 is a 220 HP industrial screw compressor designed for large-scale compressed air generation at 13 bar pressure.

At this power rating, thermal management is a critical part of compressor operation. Heat generated during compression must be managed to maintain suitable operating conditions for the compression element, lubrication system, motor and associated assemblies.

The cooling arrangement manages this thermal load through the compressor's cooling system.

Its functional cooling elements may include:

• OIL COOLER: Removes heat from circulating compressor oil in oil-injected configurations.
• COOLING FAN: Supports heat rejection through the cooler assembly.
• COOLING AIRFLOW: Directs ambient air across the heat-exchange surfaces.
• AFTERCOOLER: Where included in the supplied configuration, reduces compressed air temperature before downstream moisture separation.

For a 220 HP installation, compressor-room ventilation requires careful planning.

INSTALLATION CONSIDERATIONS:

• Provide adequate clearance around the compressor.
• Ensure unrestricted cooling-air intake and discharge.
• Avoid recirculation of hot discharge air into the compressor intake.
• Maintain clean cooler surfaces and ventilation passages.
• Keep ambient temperature within the manufacturer's specified operating limits.
• Provide sufficient space for inspection and maintenance.
• Plan hot-air discharge to prevent excessive heat accumulation inside the compressor room.

Restricted ventilation, dust accumulation and excessive ambient temperatures can contribute to elevated operating temperatures and affect equipment reliability.

The cooling system should be inspected and maintained according to the manufacturer's service instructions.


INTELLIGENT ELECTRICAL & SAFETY FEATURES

The SJ RF220 has a 220 HP / 160 kW motor rating. Its electrical infrastructure must be engineered according to the motor's electrical characteristics and the installation environment.

Functional control and protection provisions may include:

• MOTOR STARTING AND STOPPING: Controls compressor operation through the electrical system.
• LOAD/UNLOAD CONTROL: Regulates compressor loading according to configured system pressure.
• PRESSURE MONITORING: Supports monitoring of operating pressure and configured pressure limits.
• TEMPERATURE PROTECTION: Helps protect the compressor against abnormal operating temperatures.
• MOTOR PROTECTION: Electrical protection is selected according to motor rating and panel design.
• FAULT INDICATION: Controller indications assist maintenance personnel in identifying abnormal operating conditions.
• EMERGENCY STOP: Provides an emergency shutdown function where fitted in the supplied configuration.

ELECTRICAL INSTALLATION REQUIREMENTS:

• Verify motor rated current and starting characteristics.
• Select cables according to current capacity and installation conditions.
• Evaluate voltage drop across the electrical supply.
• Provide suitable overload and short-circuit protection.
• Ensure proper electrical earthing.
• Verify incoming supply voltage and frequency.
• Follow applicable industrial electrical safety standards.

At 160 kW, the electrical supply, motor starting arrangement and protection coordination should be evaluated as part of the plant's electrical load planning.

Controller model, sensor arrangement, protection settings, alarm functions and emergency-stop configuration should be confirmed against the actual machine supplied.

Electrical installation and commissioning should be carried out by qualified personnel.


STANDARD FEATURES

The SJ RF220 is a fixed-speed, single-stage rotary screw compressor designed for large industrial compressed air installations.

Its core functional systems include:

• 220 HP / 160 kW motor rating.
• Single-stage rotary screw compression technology.
• Fixed-speed operating arrangement.
• Air intake filtration system.
• Compressor lubrication arrangement, subject to supplied design.
• Oil filtration system for oil-injected configurations.
• Air-oil separation arrangement.
• Industrial cooling system.
• Electrical control and protection arrangement.
• Pressure monitoring and load/unload control, subject to controller configuration.
• Industrial enclosure and ventilation arrangement, as supplied.
• Service access for routine inspection and maintenance.

The exact standard equipment, component brands, motor efficiency class, controller functions and machine configuration should be confirmed in the approved technical quotation.


OPTIONAL FEATURES & COMPRESSED AIR SYSTEM ACCESSORIES

The SJ RF220 produces 740 CFM (20.95 m³/min) at 13 bar.

At this airflow level, the downstream compressed air treatment and distribution system becomes a major part of the overall installation.

Dryer capacity, filter flow rating, receiver sizing and pipeline dimensions must be evaluated against the actual operating conditions. Undersized components can introduce excessive pressure drop and restrict the airflow available to production equipment.

The following accessories can be incorporated according to application requirements.

1. INDUSTRIAL AIR RECEIVER TANK

An air receiver stores compressed air and helps manage short-duration demand fluctuations.

For a 220 HP compressor, receiver capacity should be calculated using:

• Compressor delivery.
• Peak compressed air demand.
• Permissible pressure variation.
• Compressor load/unload control strategy.
• Required reserve capacity.
• Simultaneous equipment consumption.

The receiver must have an appropriate design pressure, certified construction and suitable safety accessories for the installation.

2. REFRIGERATED AIR DRYER

A refrigerated air dryer reduces compressed air moisture by cooling the air and removing condensed water.

It is suitable for evaluating general industrial compressed air systems where the required pressure dew point is compatible with refrigerated drying technology.

The dryer should be selected according to:

• Actual inlet airflow.
• Maximum operating pressure.
• Inlet air temperature.
• Ambient temperature.
• Required pressure dew point.
• Manufacturer's capacity correction factors.

A nominal 750 CFM dryer should not automatically be assumed suitable for a 740 CFM compressor installation without checking its corrected capacity under actual operating conditions.

3. DESICCANT AIR DRYER

A desiccant air dryer can be considered when a lower pressure dew point is required.

Potential applications include moisture-sensitive manufacturing, specialized pneumatic equipment and industrial processes requiring dry compressed air.

Selection should account for required dew point, purge-air consumption, operating pressure and total lifecycle energy cost.

Purge-air consumption must also be included when evaluating the total compressed air requirement of the installation.

4. MOISTURE SEPARATOR

A moisture separator removes bulk liquid condensate from compressed air, generally after cooling.

It helps reduce liquid water entering downstream dryers and filtration equipment.

For high-flow installations, separator capacity and allowable pressure drop must be checked against actual operating conditions.

5. PRE-FILTER AND AFTER-FILTER

Industrial compressed air filters remove contaminants according to their filtration grade.

A suitable filtration arrangement can be selected for:

• Particulate removal.
• Liquid water and oil aerosol reduction.
• Protection of downstream air treatment equipment.
• Improved compressed air quality for connected machinery.

Filter flow capacity and pressure rating should be suitable for the 740 CFM, 13 bar configuration.

6. MICRO-FILTER

A micro-filter provides finer filtration where lower oil-aerosol and particulate levels are required.

Its filtration performance should be selected according to the required outlet air quality and specified filtration efficiency.

7. ACTIVATED CARBON FILTER

An activated carbon filter can be considered where reduction of oil vapour and odour is required.

It should be installed with suitable upstream filtration. It is not a replacement for proper moisture removal or other filtration stages.

8. AUTOMATIC CONDENSATE DRAIN

Automatic drains can be installed on air receivers, moisture separators, filters and dryers.

They help remove accumulated liquid condensate and reduce dependence on manual drainage.

Drain capacity and pressure rating should be appropriate for the installation.

9. OIL-WATER SEPARATOR

An oil-water separator can be incorporated to treat oil-contaminated condensate before disposal, subject to applicable environmental and wastewater regulations.

10. PRESSURE REGULATING VALVE

A pressure regulator can reduce downstream pressure where connected machinery requires less than 13 bar.

The regulator must be selected according to required airflow, inlet pressure, outlet pressure and allowable pressure drop.

Pressure regulation does not increase the available compressor airflow.

11. INDUSTRIAL COMPRESSED AIR PIPING

A 740 CFM compressed air installation requires an appropriately engineered distribution network.

Piping design should consider:

• Required flow rate.
• Operating pressure.
• Pipeline diameter.
• Total pipeline length.
• Fittings and branch connections.
• Simultaneous equipment demand.
• Allowable pressure drop.
• Future expansion requirements.

Industrial aluminium compressed air piping or another suitably engineered piping system can be selected according to installation requirements.

At this capacity, the main distribution header and branch pipelines should be calculated rather than selected only by nominal connection size.

12. AIR QUALITY AND SYSTEM MONITORING

Additional monitoring equipment can be incorporated where process requirements justify it:

• Airflow meters for compressed air consumption monitoring.
• Dew point monitors for moisture control.
• Differential pressure indicators across filters.
• Pressure gauges at the receiver and critical distribution points.
• Energy monitoring for compressor electrical consumption.
• Compressor-room monitoring for operating temperature and ventilation conditions.

IMPORTANT 13 BAR INSTALLATION REQUIREMENT:

All downstream equipment must be suitable for the maximum applicable operating pressure.

This includes:

• Air receiver tanks.
• Air dryers.
• Moisture separators.
• Pre-filters and after-filters.
• Micro-filters and activated carbon filters.
• Pressure regulators.
• Automatic drain valves.
• Compressed air piping and fittings.
• Hoses, couplings and safety devices.

Components designed only for conventional 7–10 bar systems must not automatically be used in a 13 bar installation.


TECHNICAL SPECIFICATIONS

Product: SJ RF220 Fixed Speed Screw Air Compressor

Model: SJ RF220
Motor Power: 220 HP
Motor Rating: 160 kW
Maximum Operating Pressure: 13 bar(g)
Pressure Equivalent: 190 PSI(g)
Pressure Equivalent: 1.3 MPa(g)
Air Delivery at 13 Bar: 740 CFM
Air Delivery at 13 Bar: 20.95 m³/min
Compressor Technology: Rotary Screw
Compression Configuration: Single Stage
Operating Technology: Fixed Speed

PRESSURE-WISE AIR DELIVERY:

At 8 bar:
1,035 CFM / 29.3 m³/min

At 10 bar:
930 CFM / 26.33 m³/min

At 13 bar:
740 CFM / 20.95 m³/min

These are the official airflow capacities at their respective operating pressure configurations.

For the 13 bar SJ RF220 product configuration, use 740 CFM / 20.95 m³/min as the rated airflow.

Final electrical, dimensional, connection, noise and component details should be confirmed through the approved technical datasheet for the supplied configuration.


INDUSTRIAL APPLICATIONS

The SJ RF220 220 HP 13 Bar Screw Air Compressor can be evaluated for large industrial installations requiring elevated compressed air pressure and substantial airflow.

With 740 CFM (20.95 m³/min) at 13 bar, it is relevant for evaluating large centralized compressed air systems, multiple high-consumption pneumatic processes and demanding industrial applications.

Its application suitability depends on the actual pressure and airflow requirements of the connected machinery.

1. SHIPYARD, OFFSHORE & LARGE-SCALE ABRASIVE BLASTING

Potential applications include:

• Large shipyard blast rooms.
• Multiple pressure blast pot installations.
• Multi-nozzle abrasive blasting systems.
• Offshore structure surface preparation.
• Large steel vessel and structural steel cleaning.
• Heavy fabrication blasting facilities.
• Industrial rust and coating removal operations.
• Large-scale surface preparation for marine structures.

The RF220 can be evaluated for large blasting installations involving multiple operating points.

Actual suitability depends on nozzle diameter, abrasive type, blasting pressure, hose dimensions and simultaneous air consumption.

For multi-pot installations, the combined nozzle demand must remain within the available 740 CFM at the required pressure.

2. MINING, QUARRYING & LARGE DRILLING SUPPORT SYSTEMS

Potential applications include:

• Pneumatic rock drilling equipment.
• Quarry drilling machinery.
• Industrial pneumatic scaling equipment.
• Mining maintenance stations.
• Pneumatic drilling support systems.
• Heavy-duty pneumatic tools.
• Specialized compressed air distribution for mining equipment.

Some mining and down-the-hole drilling systems require airflow substantially beyond 740 CFM or operate at different pressure specifications.

The drilling equipment manufacturer's pressure, airflow and duty-cycle requirements must be verified before confirming compressor suitability.

3. LARGE STEEL PLANTS & HEAVY ENGINEERING

Potential applications include:

• Large steel fabrication facilities.
• Industrial abrasive surface preparation.
• Heavy engineering maintenance equipment.
• Pneumatic clamping and specialized fixtures where specified.
• Dedicated high-pressure pneumatic machinery.
• Large industrial air-blowing stations.
• Specialized production equipment requiring elevated compressed air pressure.
• Centralized pneumatic utilities for heavy manufacturing facilities.

Conventional CNC and VMC machines generally operate at lower compressed air pressures. A 13 bar compressor should only be selected where a specific machine or connected process genuinely requires elevated pressure.

4. LARGE CONSTRUCTION & INFRASTRUCTURE PROJECTS

Potential applications include:

• Heavy-duty pneumatic breakers.
• Industrial jackhammer installations.
• Pneumatic demolition equipment.
• Multiple construction-site pneumatic tool stations.
• Infrastructure maintenance machinery.
• Specialized civil engineering equipment.
• Large centralized pneumatic service systems.

For installations involving multiple pneumatic tools, the combined air consumption and operating sequence must be calculated.

Long hoses and distribution pipelines can introduce pressure losses that affect equipment performance.

5. LARGE INDUSTRIAL PNEUMATIC CONVEYING & BULK MATERIAL HANDLING

Potential applications include:

• Pressure-based pneumatic conveying systems.
• Specialized powder transfer installations.
• Bulk material handling equipment.
• Industrial raw material transfer systems.
• Dedicated high-pressure conveying machinery.
• Process-industry material movement systems.
• Pneumatic transfer equipment for compatible dry materials.

Conveying-system requirements depend on material density, particle characteristics, pipeline diameter, conveying distance, transfer rate and pressure regime.

Dense-phase and dilute-phase conveying systems have different operating characteristics. Compressor selection must follow the conveying-system supplier's engineering calculations.

6. CENTRALIZED COMPRESSED AIR STATIONS FOR LARGE INDUSTRIAL PLANTS

Potential applications include:

• Large centralized industrial compressor rooms.
• Multiple high-consumption pneumatic production lines.
• Large industrial maintenance facilities.
• Specialized high-pressure manufacturing processes.
• Dedicated compressed air supply for heavy machinery.
• Multiple pneumatic equipment zones.
• Large industrial compressed air distribution networks.
• Production facilities requiring substantial compressed air reserves and distribution capacity.

The RF220 can be considered where the combined air demand remains within its rated delivery and the connected equipment requires the available operating pressure.

APPLICATION ENGINEERING NOTE:

A 220 HP compressor should not be selected solely on the basis of plant size or the number of connected machines.

A technically correct selection requires:

• Total connected air consumption.
• Simultaneous operating demand.
• Required pressure at each machine.
• Pressure losses through dryers, filters and piping.
• Compressed air leakage.
• Peak demand and consumption fluctuations.
• Required compressed air quality.
• Operating hours and duty profile.
• Future production expansion.

The available airflow must be sufficient at the required pressure after accounting for downstream system losses.

Compressed air pipeline or equipment pressure testing also requires a separate engineering safety assessment. This compressor should not automatically be considered suitable for pressure-vessel proof testing or hydraulic testing applications.


FREQUENTLY ASKED QUESTIONS

Q1. What is the air delivery of the SJ RF220 220 HP compressor at 13 bar?

The SJ RF220 delivers 740 CFM (20.95 m³/min) at 13 bar according to the official specification sheet.

Q2. What is the motor power of the SJ RF220?

The SJ RF220 has a 220 HP motor rating, equivalent to 160 kW.

Q3. What type of compressor is the SJ RF220?

It is a single-stage, fixed-speed rotary screw air compressor designed for large industrial compressed air applications.

Q4. Is the SJ RF220 suitable for large shipyard and abrasive blasting facilities?

It can be evaluated for large blasting facilities and multiple blasting points, provided their combined airflow demand remains within 740 CFM at the required pressure.

Q5. Can the SJ RF220 supply multiple industrial machines simultaneously?

Yes, provided the combined air consumption of the operating machines remains within the compressor's available airflow at the required pressure. Simultaneous demand, pressure losses and equipment operating cycles must be considered.

Q6. What is the airflow difference between the 8 bar, 10 bar and 13 bar configurations?

The official SJ RF220 airflow specifications are:

• 8 bar: 1,035 CFM / 29.3 m³/min.
• 10 bar: 930 CFM / 26.33 m³/min.
• 13 bar: 740 CFM / 20.95 m³/min.

The higher-pressure configuration provides lower airflow than the lower-pressure configurations.

Q7. Can the SJ RF220 be connected to an industrial air receiver tank and air dryer?

Yes. A suitably sized pressure-rated air receiver and compatible air dryer can be integrated into the system. Their flow capacity, pressure rating and operating conditions must be suitable for the 740 CFM, 13 bar installation.

Q8. Is the SJ RF220 suitable for mining and quarry drilling?

It can be considered for compatible pneumatic drilling and mining support equipment. Large drilling systems, particularly high-consumption DTH equipment, may require airflow beyond the compressor's rated capacity. OEM specifications must be checked.

Q9. Can the 13 bar compressor supply machinery requiring 7 or 8 bar?

Yes. A correctly sized pressure regulator can reduce downstream pressure to the machinery's required operating level. However, operating at unnecessarily high pressure can increase energy consumption, so the complete system pressure should be optimized.

Q10. What is the difference between the SJ RF175 and SJ RF220 at 13 bar?

Their official specifications are:

• SJ RF175: 175 HP / 132 kW, 636 CFM / 18.01 m³/min.
• SJ RF220: 220 HP / 160 kW, 740 CFM / 20.95 m³/min.

The RF220 provides approximately 16.4% higher rated airflow at 13 bar.

Q11. Can the SJ RF220 operate continuously in a large industrial facility?

Rotary screw compressors are commonly used in industrial systems with sustained compressed air demand. Actual operating duty, ambient conditions, service intervals and permissible operating limits must follow the supplied machine's technical documentation.

Q12. How should the air dryer and filtration system be selected for this compressor?

The dryer and filters should be selected according to actual airflow, operating pressure, inlet temperature, ambient conditions, required pressure dew point and filtration grade.

For the RF220, the rated airflow reference is 740 CFM at 13 bar. Corrected equipment capacity should be checked under actual operating conditions.


WHY CHOOSE SARV JAGAT?

Sarv Jagat Corporation provides industrial compressed air solutions covering screw compressors, reciprocating compressors, air dryers, air receiver tanks, filtration systems, spare parts and compressor servicing.

The SJ RF220 belongs to the SJ R Series and is designed for industrial users evaluating a 220 HP fixed-speed rotary screw compressor with a 13 bar operating pressure configuration.

Its rated delivery of 740 CFM (20.95 m³/min) makes it relevant for evaluating large compressed air installations involving shipyard surface preparation, abrasive blasting, heavy engineering, mining support, bulk material handling and centralized industrial pneumatic networks.

The complete compressed air system can be configured around actual production requirements, including:

• Industrial screw compressor selection.
• Air receiver tank sizing.
• Refrigerated and desiccant air dryer selection.
• Moisture separation and compressed air filtration.
• Pressure-rated distribution piping.
• Compressed air system monitoring.
• Spare parts and maintenance requirements.

For large industrial applications, correct compressor selection depends on the relationship between pressure, airflow, air quality and operating demand.

The SJ RF220 provides 740 CFM at 13 bar and should be evaluated against the actual requirements of the connected equipment.
Complementary Equipment

Related Industrial Screw Compressors

View All 84 Models
SJ RF 10Fixed
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

10 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.

Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
View Details
SJ RF 20Fixed
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

20 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.

Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m
View Details
SJ RF 30Fixed
30 HP 8 Bar SJ Fixed Speed Screw Air Compressor
⚙️ Fixed Speed Drive

30 HP 8 Bar SJ Fixed Speed Screw Air Compressor

Buy SJ RF30 30 HP 8 Bar Fixed Speed Screw Air Compressor. 134 CFM (3.79 m³/min), oil injected rotary screw technology for industrial applications.

Power30 HP22 kW
Pressure8 Bar115 PSI
Air Delivery134 CFM3.79 m³/m
View Details
Call
WhatsApp
Products
Get Quote