SJ RF 20⚙️ Fixed Speed Direct Drive

Power: 20 HPDual Voltage (50/60 Hz Global Ready)
✓ ISO 9001:2015 Certified
✓ CE Standard Design
✓ IS 5456 Performance Rating
High Pressure Fixed Speed SJ Screw Air Compressor•Model Code: SJ RF 20
20 HP 13 Bar SJ Fixed Speed Screw Air Compressor
Discover the SJ RF20 20 HP 13 Bar fixed speed screw air compressor with 60 CFM airflow. Designed for higher-pressure industrial compressed air usage.
Motor Power20 HP15 kW Electrical
Working Pressure13 Bar190 PSI Rating
Free Air Delivery60 CFM1.69 m³/min
Factory Price (Ex-Works)₹2,60,000
GST & Export Documentation ReadyCore Engineering Highlights:
Heavy-duty continuous 24/7 industrial duty electric motor (IE3/IE4 standard)
Precision asymmetric twin-screw rotor profile with SKF heavy-duty bearings
Smart MAM-880 micro-computer controller with automatic load/unload cycling
Low acoustic vibration enclosure with sound-absorbing fire-retardant foam lining
Oversized aluminum bar-plate heat exchanger with thermostatic oil control valve
Factory Hotline: +91-9157487233Worldwide Sea-Worthy Packaging
Verified Technical Data Sheet
ENGINEERING SPECIFICATIONS — SJ RF 20
| Specification Parameter | Certified Engineering Rating |
|---|---|
| Motor Power | 20 HP / 15 kW |
| Working Pressure (Discharge) | 13 Bar / 190 PSI / 1.3 MPa |
| Free Air Delivery (FAD Capacity) | 60 CFM / 1.69 m³/min |
| Drive Type | Fixed Speed (Direct Driven) |
| Cooling System | Oversized Vacuum-Brazed Aluminum Heat Exchanger |
| Micro-Controller PLC | MAM-880 Intelligent Micro-Computer with RS-485 Modbus |
| Electrical Grid Compatibility | 415V ±10% / 3-Phase / 50 Hz (Dual Voltage 50/60 Hz Available) |
| Operating Sound Level | 63 ± 2 dB(A) Acoustic Enclosure |
| Unit Dimensions (L × W × H) | 1250 x 850 x 1280 mm |
| Approx. Net Weight | 590 kg |
| Cooling Method | High Efficiency Air Cooled |
| Voltage & Frequency | 415V ±10% / 3-Phase / 50 Hz |
| Stage | Single Stage |
| Type | Fixed Speed |
| Technology | Oil Injected Rotary Screw |
| Drive | Direct Driven |
Technical Documentation & Plant Application Guide
PRODUCT OVERVIEW & ENGINEERING GUIDE
Authored by Sarv Jagat Corporation Engineering Team • Official Product Whitepaper
20 HP 13 Bar SJ Fixed Speed Screw Air Compressor
The SJ RF20 is a 20 HP industrial fixed-speed rotary screw air compressor designed for applications requiring compressed air at a maximum operating pressure of 13 bar. With a motor rating of 15 kW and an airflow capacity of 60 CFM (1.69 m³/min) at 13 bar, it is intended for industrial operations where higher-than-standard pneumatic pressure is specified by the connected machinery or production process.
The SJ RF20 combines rotary screw compression technology with a fixed-speed drive arrangement for supplying compressed air to suitable industrial equipment. Its 13 bar operating-pressure configuration makes it relevant to specialised pneumatic systems, selected manufacturing processes, higher-pressure machine circuits and industrial applications where the equipment manufacturer's pressure requirement is above conventional plant-air levels.
The compressor should be selected according to the actual compressed-air consumption, required operating pressure, duty cycle and air-quality requirements of the connected equipment. The available airflow at 13 bar is 60 CFM, so the combined demand of all connected machines must remain within the compressor's usable delivery capacity, allowing for system losses and appropriate operating reserve.
WHY CHOOSE THIS CAPACITY?
A 20 HP compressor is a practical capacity category for dedicated production areas and small-to-medium industrial compressed-air systems where the required pressure and consumption justify this motor rating.
The SJ RF20 delivers 60 CFM (1.69 m³/min) at 13 bar. This capacity can support appropriately sized pneumatic equipment, specialised machine circuits and selected industrial processes, provided their combined air consumption does not exceed the compressor's available delivery.
Key selection considerations include:
• 20 HP / 15 kW motor rating for the specified compressor configuration.
• Maximum operating pressure of 13 bar (190 PSI / 1.3 MPa).
• Airflow capacity of 60 CFM (1.69 m³/min) at 13 bar.
• Fixed-speed operating arrangement for applications with a reasonably predictable compressed-air demand.
• Suitable for dedicated machine groups where pressure and airflow requirements have been verified.
• Can be integrated with an appropriately pressure-rated air receiver, dryer, filtration system and distribution network.
IMPORTANT AIRFLOW AND PRESSURE SELECTION
The SJ RF20 has different airflow capacities at different operating pressures:
8 bar: 85 CFM (2.41 m³/min)
10 bar: 71 CFM (2.01 m³/min)
13 bar: 60 CFM (1.69 m³/min)
These figures represent different pressure operating conditions. The 85 CFM capacity at 8 bar and 71 CFM capacity at 10 bar must not be used when sizing a system that needs 13 bar.
Selecting a 13 bar compressor for equipment that only requires 7–8 bar can increase energy consumption without providing a useful process benefit. Where machinery requires lower pressure, a suitable downstream pressure regulator should be installed. The compressor should be selected at the pressure actually required by the application.
ADVANCED ROTARY SCREW COMPRESSION TECHNOLOGY
The SJ RF20 uses rotary screw compression technology. The compression element operates through two intermeshing helical rotors that reduce the volume of air as it moves through the compression chamber.
The basic compression process includes:
1. AIR INTAKE
Ambient air enters through the intake filtration arrangement, which helps prevent dust and airborne particles from entering the compression element.
2. ROTARY SCREW COMPRESSION
Air passes through the screw element, where the rotating profiles progressively reduce the trapped air volume and increase its pressure.
3. OIL MANAGEMENT AND AIR-OIL SEPARATION
In an oil-injected screw compressor configuration, lubricating oil supports sealing, cooling and lubrication within the compression element. The air-oil separation system separates oil from compressed air before delivery. The exact arrangement and supplied components depend on the approved machine configuration.
4. COOLING
The compressor's cooling arrangement manages heat generated during compression and supports operation within the machine's designed thermal limits.
5. COMPRESSED-AIR DELIVERY
Compressed air is delivered to the outlet at the configured operating pressure. Downstream equipment such as an air receiver, moisture separator, filters and air dryer can be integrated according to the required air quality and system design.
Rotary screw technology is commonly selected for industrial compressed-air applications requiring a continuous production supply. Actual suitability depends on the compressor's rated duty, ambient conditions, maintenance condition and operating profile.
FIXED SPEED OPERATING TECHNOLOGY
The SJ RF20 is a fixed-speed screw compressor. Its motor operates at a defined rotational speed during loaded operation rather than continuously varying speed according to compressed-air demand.
In a typical fixed-speed load/unload control arrangement, the compressor responds to system pressure:
• When system pressure falls to the configured loading point, the compressor enters its loaded operating condition and supplies compressed air.
• When system pressure reaches the configured unloading point, the compressor reduces or stops compression loading according to its control arrangement.
• The controller manages operating conditions and protective functions according to the supplied configuration.
Fixed-speed technology can be appropriate for production lines and dedicated machine groups with relatively stable compressed-air consumption. However, where demand fluctuates significantly, unloaded operation can increase energy consumption because the motor may continue running without delivering its full rated airflow.
Before selecting a fixed-speed compressor, evaluate:
• Average and peak compressed-air consumption.
• Operating hours per day and production shifts.
• Frequency and duration of load/unload cycles.
• Required pressure stability at the point of use.
• Leakage in the distribution network.
• Actual demand variation during production and non-production periods.
For applications with substantial and frequent demand variation, a VFD compressor may be worth evaluating. The correct choice depends on the measured demand profile, operating range, lifecycle energy cost and capital investment—not simply the motor horsepower.
PREMIUM INDUSTRIAL COMPONENTS
A screw compressor's operating reliability depends on the complete machine configuration, including the compression element, motor, cooling system, oil circuit, separation system, electrical controls and protective devices.
The SJ RF20 configuration can be evaluated around the following functional component groups:
• ROTARY SCREW AIR END
The compression element is responsible for the rotary screw compression process. Air-end selection should consider the required 13 bar operating pressure, rated airflow and intended duty.
• INDUSTRIAL DRIVE MOTOR
The motor supplies mechanical power to the compression element. Motor rating for the SJ RF20 is 20 HP (15 kW). Electrical characteristics, protection class and efficiency class should be confirmed against the supplied motor specification.
• AIR INTAKE FILTER
The intake filtration arrangement helps limit dust and airborne contamination entering the compression element. Inspection and replacement intervals should reflect the actual site dust conditions.
• LUBRICATION SYSTEM
For an oil-injected configuration, the lubrication circuit supports the operating requirements of the screw element. Correct oil grade, oil level and service intervals are important for maintaining the compressor within its design limits.
• OIL FILTER
The oil filtration system helps remove contaminants from circulating lubricating oil and protects components in the lubrication circuit.
• AIR-OIL SEPARATOR ELEMENT
The separator element reduces oil carryover from the compressed-air stream in an oil-injected compressor. Downstream filtration may still be required where the application has stricter air-quality requirements.
• COOLING SYSTEM
The cooling arrangement removes heat generated during compression and supports thermal management under the specified operating conditions.
• ELECTRICAL CONTROL AND PROTECTION
The electrical control system manages compressor operation and protective functions according to the controller and electrical configuration supplied with the machine.
The final component brands, controller model, motor specifications, cooling arrangement and electrical features should be verified in the approved technical quotation before ordering.
HEAVY-DUTY COOLING SYSTEM
The cooling system is an important part of the SJ RF20's thermal management arrangement. During compression, air temperature increases due to the work performed by the compression element. The cooling system helps remove this heat and maintain operating temperatures within the compressor's designed limits.
Depending on the supplied configuration, the cooling arrangement may include:
• Oil cooler for controlling lubricating oil temperature in an oil-injected configuration.
• Aftercooler for reducing compressed-air temperature before downstream distribution.
• Cooling fan for moving air through the heat-exchanger surfaces.
• Ventilation openings for air intake and hot-air discharge.
• Temperature monitoring and protective functions, subject to controller configuration.
For reliable operation, the compressor should be installed in a ventilated location with sufficient clearance around air intake and discharge areas. Hot cooling air should not be allowed to recirculate into the compressor room.
Recommended installation considerations:
• Maintain the manufacturer's specified ventilation clearance.
• Keep cooling surfaces and ventilation openings free from dust and obstruction.
• Avoid installing the compressor beside equipment that releases excessive heat.
• Provide suitable room ventilation for the heat rejected by the compressor.
• Inspect cooling components periodically, particularly in dusty industrial environments.
INTELLIGENT ELECTRICAL & SAFETY FEATURES
The electrical and safety arrangement is intended to support controlled compressor operation and protect the machine against operating conditions outside its designed limits.
Depending on the supplied controller and electrical configuration, functional systems may include:
• Compressor start/stop control.
• Load/unload operating control.
• System pressure monitoring.
• Temperature monitoring.
• Motor overload protection.
• Phase failure or phase-sequence protection, where provided.
• Emergency stop arrangement.
• Operating status and alarm indication.
• Maintenance and service alerts, where supported by the controller.
The actual controller functions, alarm parameters, electrical protection devices and monitoring features must be confirmed in the approved technical quotation.
For installation, the electrical supply should be checked against the motor nameplate and approved electrical drawings. Cable sizing, circuit protection, earthing and isolator selection should be completed by a qualified electrical professional.
STANDARD FEATURES
The SJ RF20 is a 20 HP fixed-speed rotary screw air compressor designed for industrial compressed-air applications requiring a maximum operating pressure of 13 bar.
The machine's principal configuration includes the following functional systems, with exact hardware and component selection subject to the supplied model configuration:
• 20 HP / 15 kW motor rating.
• Rotary screw compression technology.
• Fixed-speed drive arrangement.
• 13 bar maximum operating pressure.
• 60 CFM / 1.69 m³/min airflow at 13 bar.
• Air intake filtration arrangement.
• Lubrication system for an oil-injected configuration.
• Oil filtration arrangement.
• Air-oil separation system for an oil-injected configuration.
• Cooling arrangement.
• Electrical control and motor protection arrangement.
• Compressed-air outlet connection.
OPTIONAL FEATURES AND SYSTEM INTEGRATION
The following equipment can be considered when designing a complete compressed-air installation. These items should not be assumed to be included with the compressor unless they are specifically mentioned in the commercial quotation.
1. AIR RECEIVER TANK
A suitably rated air receiver stores compressed air, helps manage short-duration demand fluctuations and provides additional system volume. The receiver's pressure rating, capacity and statutory compliance must match the installation requirements.
2. REFRIGERATED AIR DRYER
A refrigerated air dryer reduces moisture content in compressed air by cooling the air and separating condensed water. Dryer selection should consider actual inlet airflow, inlet temperature, operating pressure and required pressure dew point.
3. DESICCANT AIR DRYER
A desiccant dryer can be considered where a lower pressure dew point is required than a refrigerated dryer can provide. The selection should account for purge-air consumption and the required air-quality specification.
4. MOISTURE SEPARATOR
A moisture separator removes bulk liquid condensate from compressed air. It is generally installed where effective separation of liquid water is required before downstream treatment.
5. PRE-FILTER AND AFTER-FILTER
Compressed-air filters help remove particles and liquid aerosols according to their filtration grade. Filter selection should be based on the required air-quality class and allowable pressure drop.
6. MICRO-FILTER
A micro-filter can provide finer aerosol removal where the application requires additional treatment. Its filtration performance must be matched to the required air-quality specification.
7. ACTIVATED CARBON FILTER
An activated carbon filter can reduce oil vapour and certain odours. It is used where the specified air-quality requirement justifies this treatment. It does not replace particulate and aerosol filtration.
8. AUTOMATIC CONDENSATE DRAIN
An automatic drain removes collected condensate from receivers, filters, separators and dryers. Correct drain selection and maintenance help prevent condensate accumulation.
9. OIL-WATER SEPARATOR
An oil-water separator can be used to treat oil-containing compressor condensate before disposal, subject to applicable environmental and local discharge requirements.
10. COMPRESSED-AIR DISTRIBUTION PIPING
A suitably designed aluminium or other approved compressed-air piping system can distribute air to production areas. Pipe diameter should be selected according to airflow, pipe length, allowable pressure drop and future demand.
11. PRESSURE REGULATOR AND LINE ACCESSORIES
Pressure regulators, isolation valves, pressure gauges and appropriately rated hoses can be used to control and distribute compressed air at the pressure required by individual machines.
12. AIRFLOW METER AND DEW POINT MONITOR
An airflow meter helps monitor compressed-air consumption. A dew point monitor can be installed where moisture control is critical to production quality.
IMPORTANT 13 BAR SYSTEM DESIGN REQUIREMENTS
The SJ RF20 is rated for 60 CFM (1.69 m³/min) at 13 bar. The complete compressed-air system must be designed for the actual operating pressure and airflow.
For a 13 bar installation, verify the pressure rating of every component exposed to the compressed-air supply, including:
• Air receiver and associated fittings.
• Refrigerated or desiccant air dryer.
• Moisture separators and filters.
• Condensate drains.
• Distribution pipes and connectors.
• Isolation valves and pressure regulators.
• Flexible hoses and machine connections.
• Pressure gauges, transmitters and safety valves.
Components rated only for conventional 8 or 10 bar systems must not be used at 13 bar unless their manufacturer confirms suitability for the actual maximum pressure and applicable design conditions.
A pressure regulator should be installed where downstream equipment requires a lower pressure than the main distribution header.
INDUSTRIAL APPLICATIONS
The SJ RF20 can be evaluated for dedicated industrial applications where the connected equipment specifically requires compressed air at or near 13 bar and its total demand is within the available 60 CFM capacity.
The following are potential application areas. Final suitability depends on the machinery manufacturer's pressure requirement, actual consumption, duty cycle and air-quality specification.
1. SPECIAL-PURPOSE MACHINERY AND AUTOMATED PRODUCTION CELLS
• Special-purpose machine pneumatic circuits.
• Higher-pressure pneumatic clamping fixtures.
• Pneumatic indexing and positioning systems.
• Specialised machine-actuation circuits.
• Automated assembly stations with specified higher-pressure pneumatic functions.
• Pneumatic fixture locking and release mechanisms.
These applications should be considered only where the machine OEM specifies a pressure requirement compatible with the compressor's delivery pressure.
2. PNEUMATIC COMPONENT MANUFACTURING
• Pneumatic actuator assembly equipment.
• Specialised pneumatic valve manufacturing machinery.
• Pneumatic component functional testing benches.
• Selected compressed-air-operated assembly fixtures.
• Pneumatic control-unit testing equipment.
The required test pressure, test medium and safety enclosure must be verified for each test bench. A compressor supplying 13 bar air is not automatically suitable for every component pressure-testing operation.
3. INDUSTRIAL MACHINE TESTING AND COMMISSIONING
• OEM machine commissioning rigs.
• Pneumatic circuit leak-detection arrangements.
• Selected pneumatic actuator performance test benches.
• Compressed-air-operated functional testing equipment.
• Specialised pneumatic control-panel testing setups.
Compressed-air leak testing must be performed using an engineered procedure and suitable safeguards. High-pressure pneumatic testing can store substantial energy and requires appropriate exclusion zones, pressure controls and protective arrangements.
4. SPECIALISED PACKAGING AND PROCESS MACHINERY
• Packaging-machine pneumatic circuits where the OEM specifies higher pressure.
• Specialised sealing and actuation mechanisms.
• Pneumatic material-handling equipment.
• Selected industrial dispensing and dosing machine actuators.
• Specialised production-line mechanisms using higher-pressure compressed air.
Many conventional packaging machines operate at lower pressures. A 13 bar supply is relevant only where the connected machine or a specific pneumatic circuit requires it.
5. INDUSTRIAL CLEANING AND PURGING SYSTEMS
• Selected high-pressure compressed-air purging arrangements.
• Specialised pneumatic cleaning equipment.
• Machine maintenance blow-off systems designed for the specified pressure.
• Industrial equipment drying and purging operations where compressed-air quality is suitable.
For operator safety, compressed-air blow-off must use suitable safety nozzles, pressure controls and protective measures. Compressed air must never be directed at a person.
6. SELECTED AUTOMOTIVE AND ENGINEERING PRODUCTION
• Specialised pneumatic assembly fixtures.
• Higher-pressure machine clamping circuits.
• Selected automotive component manufacturing equipment.
• Pneumatic actuator test stations.
• Specialised machine-tool auxiliary circuits where specified by the OEM.
Standard CNC and VMC machines commonly use lower-pressure compressed air for general pneumatic functions. The 13 bar compressor should not be selected for these machines unless the equipment documentation identifies a genuine 13 bar requirement.
7. INDUSTRIAL MAINTENANCE AND SERVICE FACILITIES
• Specialised pneumatic maintenance equipment.
• Selected higher-pressure pneumatic actuation systems.
• OEM-specified compressed-air service rigs.
• Dedicated machine maintenance stations requiring higher-pressure air.
The required pressure and airflow should be checked at the point of use, accounting for pressure losses through filters, dryers, regulators and distribution piping.
APPLICATION SELECTION NOTE
The SJ RF20 provides 60 CFM at 13 bar. It should not be assumed to operate multiple high-consumption machines simultaneously merely because their individual pressure requirements are compatible.
Before installation, calculate the combined demand:
Total connected demand = Sum of individual machine air consumption × Simultaneous operating factor
Then evaluate the result against the compressor's available airflow, operating profile and required reserve. Also account for leakage, pressure drop and any air consumed by downstream treatment equipment.
Hydraulic presses, hydraulic power packs and hydrostatic pressure-testing systems generally use liquid-based hydraulic or hydrostatic systems. They should not be treated as ordinary compressed-air applications.
TECHNICAL SPECIFICATIONS
Product: SJ RF20 Fixed Speed Screw Air Compressor
Motor Power: 20 HP
Motor Power: 15 kW
Maximum Operating Pressure: 13 bar
Pressure Equivalent: 190 PSI(g) / 1.3 MPa(g)
Airflow at 13 bar: 60 CFM
Airflow at 13 bar: 1.69 m³/min
Compression Technology: Rotary Screw
Drive Technology: Fixed Speed
Compression Stage: Single Stage
AIRFLOW AT DIFFERENT OPERATING PRESSURES
At 8 bar: 85 CFM / 2.41 m³/min
At 10 bar: 71 CFM / 2.01 m³/min
At 13 bar: 60 CFM / 1.69 m³/min
The airflow values correspond to different operating pressures and must not be interchanged during compressor selection. For a system requiring 13 bar, use the 13 bar airflow rating of 60 CFM.
INDUSTRIAL APPLICATIONS — QUICK SELECTION CHECK
Before purchasing or installing the SJ RF20, confirm:
• Required operating pressure at the machine inlet.
• Individual and combined machine airflow consumption.
• Simultaneous operating demand.
• Required compressed-air quality.
• Operating hours and duty cycle.
• Pressure losses through treatment equipment and distribution piping.
• Pressure rating of all downstream components.
• Electrical supply compatibility and installation conditions.
FREQUENTLY ASKED QUESTIONS
Q1. What is the motor power of the SJ RF20 screw air compressor?
The SJ RF20 is a 20 HP industrial screw air compressor with a motor power rating of 15 kW.
Q2. What is the maximum operating pressure of the SJ RF20?
The specified maximum operating pressure is 13 bar, equivalent to 190 PSI(g) or 1.3 MPa(g).
Q3. What is the airflow capacity of the SJ RF20 at 13 bar?
The specified airflow at 13 bar is 60 CFM or 1.69 m³/min.
Q4. Is the SJ RF20 a fixed-speed or VFD screw compressor?
The SJ RF20 covered here is a fixed-speed screw compressor. Its motor operates at a defined rotational speed during loaded operation.
Q5. Can the SJ RF20 be used for standard 8 bar applications?
The model's specification also lists 85 CFM at 8 bar. However, compressor selection should be based on the required pressure and the approved operating configuration. A 13 bar system should not be operated at a higher pressure than its connected equipment is designed to withstand.
Q6. Can this compressor operate CNC and VMC machines?
It may supply suitable CNC or VMC pneumatic circuits if their OEM documentation confirms the required pressure and airflow. Most conventional CNC and VMC general-purpose pneumatic connections do not require 13 bar.
Q7. Can the SJ RF20 supply multiple machines?
It can supply multiple machines only when their combined simultaneous airflow demand, pressure requirement and air-quality needs are within the available system capacity. At 13 bar, the specified compressor airflow is 60 CFM.
Q8. Which air dryer is suitable for the SJ RF20?
A refrigerated or desiccant air dryer may be selected according to the required pressure dew point, inlet conditions and actual airflow. The dryer must be rated for the system's operating pressure and correctly sized for the compressor's delivery.
Q9. Does the compressor include an air receiver tank and air dryer?
The air receiver, dryer, filters and other downstream accessories should be confirmed in the approved quotation. They should not be assumed to be included unless specifically listed.
Q10. Can the SJ RF20 be used for hydraulic pressure testing?
No. Hydraulic pressure testing normally uses a liquid-based hydraulic test system. Compressed-air testing is a different process and requires a separately engineered arrangement with appropriate safety measures.
Q11. Is the SJ RF20 suitable for continuous industrial operation?
Suitability depends on the machine's approved duty rating, ambient conditions, ventilation, maintenance and actual operating profile. Confirm the intended duty with the supplied technical documentation before selecting it for a particular production schedule.
Q12. What should be checked before installing a 13 bar compressor?
Verify the actual machine pressure and airflow requirements, pressure rating of the receiver, dryer, filters, piping, valves and hoses, electrical supply, ventilation and safety arrangements. A downstream regulator should be used where equipment requires lower pressure.
WHY CHOOSE SARV JAGAT?
Sarv Jagat Corporation provides industrial compressed-air solutions covering screw air compressors, reciprocating air compressors, air receiver tanks, refrigerated air dryers, filtration equipment, spares and service support.
The SJ RF20 is intended for applications where a 20 HP fixed-speed compressor with a specified 13 bar operating-pressure capability and 60 CFM airflow is appropriate.
When selecting the compressor, Sarv Jagat can help evaluate the required pressure, airflow, machine demand, air-treatment arrangement and system accessories to establish a suitable compressed-air configuration.
For technical evaluation or a quotation, share the following details:
• Required operating pressure in bar.
• Total airflow requirement in CFM or m³/min.
• Connected machinery and application.
• Required air quality or pressure dew point.
• Operating hours and production schedule.
• Air receiver and air dryer requirements.
SARV JAGAT CORPORATION
Industrial Air Compressors | Manufacturing | Sales | Spares | Service | Export
Ahmedabad, Gujarat, India
Complementary Equipment
View All 84 ModelsRelated Industrial Screw Compressors
SJ RF 10Fixed

⚙️ Fixed Speed Drive
10 HP 8 Bar SJ Fixed Speed Screw Air Compressor
Buy 10 HP 8 Bar Fixed Speed Screw Air Compressor from Sarv Jagat. Delivers 45 CFM with reliable rotary screw technology, energy efficient & Low maintenance.
Power10 HP7.5 kW
Pressure8 Bar116 PSI
Air Delivery45 CFM1.27 m³/m
SJ RF 20Fixed

⚙️ Fixed Speed Drive
20 HP 8 Bar SJ Fixed Speed Screw Air Compressor
Buy SJ RF20 20 HP 8 Bar Fixed Speed Screw Air Compressor. 85 CFM (2.41 m³/min), oil injected rotary screw technology for industrial use.
Power20 HP15 kW
Pressure8 Bar115 PSI
Air Delivery85 CFM2.41 m³/m

